GE / IP FANUC Series 90/30 In Stock

A Global Supplier of Industrial Electronics

Mon-Fri 8AM-5PM EST

1761-L10BWA

Rated 3.6/5 Based on 7 ratings.

Rate your purchase of the 1761-L10BWA

Rockwell Disclaimer: The product is used surplus. PDF Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because PDF Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, PDF Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. PDF Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. PDF Supply also makes no representations as to your right to install any such firmware on the product. PDF Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

PDF Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with PDF Supply's 1-year, 2-year, or 3-year warranty.

Original Packaging

$1462

2 In Stock

1 Yr PDF Supply warranty

What is Original Packaging?

Ships .

Refurbished

$864

Save $598

22 In Stock

1 Yr PDF Supply warranty

What is Refurbished?

Ships .

Repair Service

$692

Save $770

5-10 Days

1 Yr PDF Supply warranty

 

Repair Completion:
5-10 Days

Common misspellings:
  • l761-L10BWA
  • 176l-L10BWA
  • 1761-110BWA
  • 1761-Ll0BWA
  • 1761-L1oBWA
  • 1761-L108WA
  • 1761L10BWA

Technical Specifications for 1761-L10BWA

Manufacturer: Rockwell Automation
Brand: Allen-Bradley
Product Family: MicroLogix
Product Type: Controller / Processor
Part Number: 1761-L10BWA
Number of I/O: 10
Number of Inputs:6 (sinking and sourcing)
Input Operating Range: 14É26.4V DC max @ 55 ¡C (131 ¡F) 14É30.0V DC max @ 30 ¡C (86 ¡F)
Input Signal Delay:standard inputs: selectable from 0.5 to 16 ms high-speed inputs: selectable from 0.075 to 16 ms
Number of outputs:4 (Relay)
Relay Output operating range: 5 - 125V DC / 5 - 264V AC
Output Signal Delay:10 ms
Power supply: 85-264V ac,
Operating Frequency: 47-63 Hz
Inrush current: 30A for 8 ms
Power cycles:50,000 minimum
Memory:1 K EEPROM composed of approximately 737 instruction words and 437 data words.
Communication port: RS232
Protocol:DF1
Communication Cable: 1761-CBL-PM02 or 1761-CBL-HM02

About 1761-L10BWA

The 1761-L10BWA MicroLogix 1000 Controller that is manufactured by Allen-Bradley. This module features an integrated Six (6) 24VDC discrete inputs, Four (4) Relay Outputs with One (1) 6.6 kHz High-Speed input channel. It is also provided with This controller has One (1) RS232 8-Pin mini DIN communication port that supports DF1 and MODBUS slave protocol. It has a line voltage requirement of 120/240VAC with Power Consumption of 24VA at 120 VAC and 32 VA at 240 VAC. The acceptable power supply range that can be applied to this controller is 85 - 264VAC at 47 - 63 Hz. It has an inrush current of 30A for 8 ms and isolation voltage rating of 1500V ac. This product is part of the MicroLogix starter kit family that is ideal for use in small scale application such as machine automation and simple process automation. The 1761-L10BWA has an integrated memory of 1KB memory that is pre-allocated for 737 instruction words and 437 data words, approximately. The controllerÕs memory type is an Electronically Erasable Programmable Read-Only Memory (EEPROM) which retains the user and program data without the need of a back-up battery. This type of memory preserves the stored data thus, lessening the risk of machine downtime and increasing availability of the system. Program erasure may only be initiated by applying a specific voltage signal to specific pins of the EEPROM chip. This controller, though compact in form and small in size, is industrially approved as it carries certification from C-UL Class I, Division 2 Groups A, B, C, D certified, UL listed (Class I, Division 2 Groups A, B, C, D certified), CE marked for all applicable directives. This controller can last up to 50,000 power cycles in minimum. When installing the 1761-L10BWA MicroLogix 1000 controller, the physical dimensions of 120 (4.72) x 73 (2.87) x 80 (3.15) must be taken into consideration. It supports DIN rail or direct panel mounting installation and supports horizontal or vertical mounting. It requires minimum clearances of Two (2) inches on all sides of the controller to ensure optimum air flow is achieved to promote natural cooling. Ensure that the hardware nameplate is facing upward when installing the controller vertically. Environmental operating parameters for this controller includes an operating temperature of 0¡C to +55¡C (+32¡F to +131¡F) for horizontal mounting while 0¡C to +45¡C (+32¡F to +113¡F) for Vertical mounting. It has an operating humidity requirement of 5-95% non-condensing. Operating vibration for this controller is rated 5 Hz to 2k Hz, 0.381 mm (0.015 in.) peak to peak/2.5g panel mounted, 1hr per axis while operating shock is Operating: 10g peak acceleration (7.5g DIN rail mounted) (11±1 ms duration) 3 times each direction, each axis. Alternatively, it may also be configured using MicroLogix 1000 Hand-Held Programmer (HHP), a mobile programming unit that may also be used to create, edit, monitor, troubleshoot, upload, download and delete MicroLogix 1000 user programs.
The Allen-Bradley 1761-L10BWA is a MicroLogix 1000 Controller. This controller is designed for Power Supply input voltage of 120/240VAC with embedded Six (6) 24VDC discrete inputs, Four (4) Relay Outputs with One (1) 6.6 kHz High-Speed input channel. This controller has One (1) RS232 8-Pin mini DIN communication port that supports DF1, MODBUS slave protocol.

F.A.Q for 1761-L10BWA

Q: 1. What are the available communication ports of 1761-L10BWA?A: The 1761-L10BWA has One (1) 8-Pin mini DIN RS232 communication port supporting DF1 and MODBUS slave protocols.
Q: 2. What is the required power supply for the 1761-L10BWA?A: Power supply requirement of this controller is 120/240VAC with operating range of 85 - 264VAC at 47 - 63 Hz.
Q: 3. What is the cable used to download program to the MicroLogix 1000 controller?A: Compatible communication cables are 1761-CBL-PM02 or 1761-CBL-HM02 communication cables.

PDFsupply Tech

The 1761-L10BWA is a MicroLogix 1000 Programmable Logic Controller with a total of Ten (10) I/O points that is comprised of Six (6) input and Four (4) outputs and an additional One (1) High-Speed input. This controller is an entry-level MicroLogix controller similar to the 1761-L10BBB as both have the same number of inputs except the power supply requirement.


PDF Supply sells used surplus products. PDF Supply is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by PDF Supply come with PDF Supply’s 1-year, 2-year, or 3-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.

Rockwell Disclaimer: The product is used surplus. PDF Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because PDF Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, PDF Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. PDF Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. PDF Supply also makes no representations as to your right to install any such firmware on the product. PDF Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.