GE / IP FANUC Series 90/30 In Stock
Home » Allen Bradley » Flex I/O » You are here: MVI94-MCM-MHI
MVI94-MCM-MHI
Rockwell Disclaimer: The product is used surplus. PDF Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because PDF Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, PDF Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. PDF Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. PDF Supply also makes no representations as to your right to install any such firmware on the product. PDF Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
PDF Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with PDF Supply's 1-year, 2-year, or 3-year warranty.
Other Available Revisions for the MVI94-MCM-MHI MVI94-MCM-MHI//A
Common misspellings:
- MV194-MCM-MHI
- MVl94-MCM-MHI
- MVI9A-MCM-MHI
- MVI94-MCM-MH1
- MVI94-MCM-MHl
- MVI94MCMMHI
Technical Specifications for MVI94-MCM-MHI
| Brand | Allen-Bradley / Rockwell Automation |
|---|---|
| Series | Flex I/O |
| Part Number | MVI94-MCM-MHI |
| Product Type | Network Interface Module |
| Network Type | Modbus |
| Modbus Master Device Operation | Supported |
| Modbus Slave Device Operation | Supported |
| Power Supply Voltage Rating | 12 Volts DC, 24 Volts DC |
| Operating Shock | 30 g |
| Operating Temperature | 32 to 140 degrees Fahrenheit |
About MVI94-MCM-MHI
The MVI94-MCM-MHI interface module is a network interface module that has been designed and manufactured by GE Fanuc/ProSoft Technology. This network interface module is part of the ProSoft Flex I/O series of modules. This interface module is capable of handling up to 100 communications per port. It can tolerate up to 30 g of operating shock. The MVI94-MCM-MHI network interface module draws its DC voltage from an external power supply, and it can operate at a voltage rating of 12 Volts DC or 24 Volts DC. It is compatible with a variety of Modbus devices. This interface module can transfer registers to and from data files in Flex I/O processors and it can store these registers in its memory. The maximum number of registers that it can handle at a time is 5000.
The industrial applications that the GE Fanuc/ProSoft Technology Flex I/O MVI94-MCM-MHI network interface module is well-suited for include pipeline, mining, SCADA communications, and paper processing applications. The functions of this interface module’s memory can all be configured by the users, and this module has an application port that can emulate either a Modbus master device or a Modbus slave device depending on the application. When the port emulates a slave device, a remote Modbus master device has access to all the data stored in the MVI94-MCM-MHI network interface module. When the port emulates a master device, it can issue Modbus commands to the other Modbus nodes that are part of the same network. The operating temperature range for the MVI94-MCM-MHI network interface module is from 32 to 140 degrees Fahrenheit.
The GE Fanuc and ProSoft Technology MVI94-MCM-MHI interface module is a Modbus network interface module from the Flex I/O series. It has a special application port that can handle Modbus master functions and Modbus slave functions.
F.A.Q for MVI94-MCM-MHI
