GE / IP FANUC Series 90/30 In Stock
Home » Allen Bradley » Flex I/O » You are here: 1794-of4ixt
1794-of4ixt
Rockwell Disclaimer: The product is used surplus. PDF Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because PDF Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, PDF Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. PDF Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. PDF Supply also makes no representations as to your right to install any such firmware on the product. PDF Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
PDF Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with PDF Supply's 1-year, 2-year, or 3-year warranty.
Other Available Revisions for the 1794-of4ixt 1794-of4ixt//A
Common misspellings:
- l794-of4ixt
- 179A-of4ixt
- 1794-0f4ixt
- 1794-ofAixt
- 1794of4ixt
Technical Specifications for 1794-of4ixt
| Brand | Allen-Bradley / Rockwell Automation |
|---|---|
| Series | Flex I/O |
| Part number | 1794-OF4IXT |
| Product type | Isolated output module |
| Certifications | CE, Ex, TUV, c-UL-us |
| Voltage resolution | 0.320 millivolts per count |
| Current resolution | 0.656 microamps per count |
| Update rate | 2.5/5 milliseconds |
| Current draw | 210 milliamps |
| Supply voltage | 24 Volts DC |
| Maximum power dissipation | 2 Watts |
| LED indicators | 1 |
| Dimensions | 46 x 94 x 75 millimeters |
About 1794-of4ixt
The Allen-Bradley 1794-OF4IXT module is an output module with isolation between the output channels. The module has multiple certifications including the CE, Ex, TUV, and c-UL-us certifications. When the module is being mounted, it should be ensured that debris is not able to fall into the module because it could damage the module. The module should not be disconnected unless the power has been switched off or the working area is known to be non-hazardous. To prevent electrical arcing, the wiring should not be connected or disconnected when the field side power is on. To comply with the CE low voltage directive, all connections to the 1794-OF4IXT output module must be powered by either an SELV or a PELV-compliant power supply.
There are 4 isolated output channels on the 1794-OF4IXT output module. The voltage resolution is 0.32 millivolts per count and the current resolution is 0.656 microamps per count. The update rate is 2.5 to 5 milliseconds for all channels. For the output current terminals, the output current is 0 milliamps until the module is configured, and the module can support 0 to 20 milliamps and 4 to 20 milliamps output current ranges when it is configured. For the output voltage terminals, the output voltage rating is 0 Volts until the terminal is configured, and then the module can support +/-10 Volts, 0 to 10 Volts, +/-5 Volts, and 0 to 5 Volts output voltage ranges. The 1794-OF4IXT output module draws 210 milliamps of current at 24 Volts DC from an external power supply and it dissipates a maximum of 2 Watts of power at 31.2 Volts DC. The dimensions of the 1794-OF4IXT output module are 46 x 94 x 75 millimeters.
The 1794-OF4IXT module is an Allen-Bradley isolated output module. A total of 4 isolated output channels are available on the module.
F.A.Q for 1794-of4ixt
