GE / IP FANUC Series 90/30 In Stock
Home » Allen Bradley » Flex I/O » You are here: 1794-ib32
1794-ib32
Rockwell Disclaimer: The product is used surplus. PDF Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because PDF Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, PDF Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. PDF Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. PDF Supply also makes no representations as to your right to install any such firmware on the product. PDF Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
PDF Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with PDF Supply's 1-year, 2-year, or 3-year warranty.
Other Available Revisions for the 1794-ib32 1794-ib32//A
Common misspellings:
- l794-ib32
- 179A-ib32
- 1794-i832
- 1794ib32
Technical Specifications for 1794-ib32
| Brand | Allen-Bradley / Rockwell Automation |
|---|---|
| Series | Flex I/O |
| Part number | 1794-IB32 |
| Description | I/O module |
| Voltage | 24 Volts DC |
| Inputs | 32 digital sink inputs |
| Temperature | 0 to 55 degrees Celsius |
| LED indicators | 32 status indicators |
| Power dissipation | 6 Watts |
| Heat dissipation | 20.47 BTU/Hr |
| Input Impedance | 22.2 K Ohms |
About 1794-ib32
The 1794-IB32 module is an I/O module manufactured by Allen-Bradley. It is powered with a nominal voltage rating of 24 Volts DC. The module comes with 32 digital sink inputs. The input module is made to be installed on the terminal base unit in the Flex I/O PLC system. The module has an open enclosure and it comes with the T3C north American temperature code rating. The inputs of the module can be digitally configured. The module is mounted using a DIN rail. It uses screw connections for the electrical plugs. The 1794-IB32 input module supports a wide variety of applications with different devices from proximity switches to sensor devices. The outer surface of the module is conformally coated and this coating protects it from harsh environmental conditions.
The Allen-Bradley 1794-IB32 input module can be used in an environment with a temperature range between 0 and 55 degrees Celsius. The module weighs 2 kilograms and has dimensions of 9.4 centimeters in height, 9.4 centimeters in width, and 6.9 centimeters in depth. The front face of the 1794-IB32 input module comes with 32 status indicator lights that are yellow. These field side status indicators show different status updates for the inputs in the input module. The module dissipates a total of 6 Watts of power with 31.2 Volts DC voltage, and a total of 20.47 BTU per hour of heat with normal operating conditions. The nominal input impedance of the input module is 22.2 kiloohms. The module must be installed in an enclosure with an IP 54 protection rating when it is used in a Zone 2 rated industrial environment. The main power source should be fully disconnected during the installation of the module and the module should be properly earthed.
The 1794-IB32 module is an I/O module made by Allen-Bradley. It has a nominal voltage rating of 24 Volts DC.
F.A.Q for 1794-ib32
