GE / IP FANUC Series 90/30 In Stock
Home » Allen Bradley » Flex I/O » You are here: 1794-TBNF
1794-TBNF
Rockwell Disclaimer: The product is used surplus. PDF Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because PDF Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, PDF Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. PDF Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. PDF Supply also makes no representations as to your right to install any such firmware on the product. PDF Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
PDF Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with PDF Supply's 1-year, 2-year, or 3-year warranty.
Product Description
The 1794-TBNF Terminal Base is a Flex I/O terminal base unit which has a terminal screw torque of 1.4 N-m, and a supply voltage of 250 Volts AC/DC, at 50 to 60 Hertz, 10 Amps . It has a 250 Volts continuous isolation voltage at maximum and uses the 0.34 to 3.3 square millimeters wire. Its approximate dimensions are 94 x 94 x 69 millimeters.
Other Available Revisions for the 1794-TBNF 1794-TBNF//A
Common misspellings:
- l794-TBNF
- 179A-TBNF
- 1794-T8NF
- 1794TBNF
Technical Specifications for 1794-TBNF
| Brand | Allen-Bradley / Rockwell Automation |
|---|---|
| Series | Flex I/O |
| Part Number | 1794-TBNF |
| Product Type | Fused Terminal Base Unit |
| Product Line | Flex I/O 1794 |
| Terminal Screw Torque | 1.4 Nm |
| Supply Voltage | 250 V AC/DC |
| Frequency | 50/60Hz |
| Current Rating | 10 A |
| Maximum Isolation Voltage | 250 V (Continuous) |
| Voltage Rating | 24 V DC/AC, 120 V DC/AC, 230 V DC/AC |
| Wire Size | 0.34-3.3 square millimeters |
| Shipping Dimensions | 94 x 94 x 69 mm |
| Power Rating | 650 W |
| Operating Temperature | -20 to 55 degrees Celsius |
About 1794-TBNF
The Allen-Bradley 1794-TBNF Terminal Base is a fused terminal base unit that is manufactured as a Flex I/O 1794 series device. This unit comes with 16 I/O connections, 2 common terminals, and 2 positive voltage terminals, and it also has screw terminals and a covering for the input and output wiring. The 1794-TBNF Terminal Base Unit has a 250 Volts AC/DC voltage rating with an all-out current rating of 10 Amps and a base unit with a power rating of 650 Watts. This terminal base unit offers 8 slow-blow fuses with dimensions of 5 x 20 millimeters and 1.6 Amps fuse current ratings at 250 Volts AC. This unit also provides an I/O termination by using the spring clamp. The Allen-Bradley 1794-TBNF Terminal Base Unit features a terminal screw torque of 1.4 N-m and it uses copper wire that is 22/12 AWG rated at 75 degrees Celsius, with 1.2-millimeter (3/64-inch) insulation.
The Allen-Bradley 1794-TBNF Terminal Base Unit has a Flexbus rating of 5 Volts DC, 640 milliamps, and a V/COM terminal voltage of 250 Volts AC/DC at 50/60 Hertz frequency and 10 Amps of current. This terminal base has voltage isolation of 250 Volts (continuous) at maximum between the field wiring terminals to the Flexbus and it uses the basic insulation type while the actual isolation voltage is dependent on the installed module. The 1794-TBNF Terminal Base Unit operates in a temperature range of -20 to 55 degrees Celsius, and its storage temperature range is -40 to 85 degrees Celsius. This unit can tolerate an operational shock of 30 g, and it operates at a vibration of 5 g and at a frequency of 10 to 500 Hertz.
The 1794-TBNF Terminal Base is a Flex I/O terminal base unit which has a terminal screw torque of 1.4 N-m, and a supply voltage of 250 Volts AC/DC, at 50 to 60 Hertz, 10 Amps . It has a 250 Volts continuous isolation voltage at maximum and uses the 0.34 to 3.3 square millimeters wire. Its approximate dimensions are 94 x 94 x 69 millimeters.
F.A.Q for 1794-TBNF
