GE / IP FANUC Series 90/30 In Stock
Home » Allen Bradley » Flex I/O » You are here: 1794-TB3TS
1794-TB3TS
Rockwell Disclaimer: The product is used surplus. PDF Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because PDF Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, PDF Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. PDF Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. PDF Supply also makes no representations as to your right to install any such firmware on the product. PDF Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
PDF Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with PDF Supply's 1-year, 2-year, or 3-year warranty.
Other Available Revisions for the 1794-TB3TS 1794-TB3TS//A
Common misspellings:
- l794-TB3TS
- 179A-TB3TS
- 1794-T83TS
- 1794TB3TS
Technical Specifications for 1794-TB3TS
| Brand | Allen-Bradley / Rockwell Automation |
|---|---|
| Series | Flex I/O |
| Part Number | 1794-TB3TS |
| Product Type | Terminal Base Unit |
| Product Family | Flex I/O 1794 |
| Terminal Screw Torque | 0.56 to 0.79 Nm |
| Supply Voltage | 125V DC/AC |
| Frequency | 50/60 Hz |
| Current Rating | 10 A |
| Isolation Voltage | 125 V (Continuous) |
| Voltage Rating | 24V DC/AC, 120V DC/AC |
| Approximate Dimensions | 94 x 94 x 69 mm |
| Wire Size | 22 to 12 AWG |
| Mounting | DIN Rail/Wall/Panel Mounting |
| Flexbus Rating | 640 mA at 5 V DC |
About 1794-TB3TS
The 1794-TB3TS Terminal Base Unit is a Flex I/O terminal base unit that is manufactured by Allen-Bradley/Rockwell Automation as a Flex I/O 1794 series device. This device is intended to provide terminal connection points for different Flex I/O input and output module wiring connections and to provide connections with the other terminal base units to form a backplane. It features I/O connections for 16 I/O, 10 common terminals, 8 chassis ground terminals, and 4 voltage terminals. The terminal base also has 2 sets of CJ devices that are specifically intended for use with the temperature modules in the Flex I/O product line. The electrical application rating for this terminal base unit is 125 Volts AC/DC, and it also has 10 Amps of maximum current capacity.
The Allen-Bradley 1794-TB3TS Terminal Base Unit supports DIN rail, wall, or panel mounting, and it also offers module termination through the spring clamp. This unit has a Flexbus rated current of 640 milliamps at 5 Volts DC, and it provides a maximum of 2 Amps of current at the input and output terminals. The Allen-Bradley 1794-TB3TS Terminal Base Unit comes with a V/COM rated at 125 Volts AC/DC and 10 Amps at 50/60 Hertz. It also offers voltage isolation based on the connection to the 125 Volts isolation voltage between the Flexbus terminal and the field wiring terminals. It uses insulated copper wire that is 22 to 12 AWG rated for 75 degrees Celsius. The module has an open enclosure and it is designated with the T4 and T4A temperature codes, with a maximum temperature rating of 135 degrees Celsius.
The Allen-Bradley 1794-TB3TS Flex I/O 1794 Terminal Base Unit has a supply voltage of 125 Volts AC/DC and 0.56 to 0.79 N-m of terminal screw torque. This unit has a frequency of 50/60 Hertz, a current rating of 10 Amps, and an isolation voltage of 125 Volts (continuous).
F.A.Q for 1794-TB3TS
