GE / IP FANUC Series 90/30 In Stock
Home » Allen Bradley » Flex I/O » You are here: 1794-OV16P
1794-OV16P
Rockwell Disclaimer: The product is used surplus. PDF Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because PDF Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, PDF Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. PDF Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. PDF Supply also makes no representations as to your right to install any such firmware on the product. PDF Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
PDF Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with PDF Supply's 1-year, 2-year, or 3-year warranty.
Other Available Revisions for the 1794-OV16P 1794-OV16P//A
Common misspellings:
- l794-OV16P
- 179A-OV16P
- 1794-0V16P
- 1794-OVl6P
- 1794OV16P
Technical Specifications for 1794-OV16P
| Brand | Allen-Bradley / Rockwell Automation |
|---|---|
| Series | Flex I/O |
| Part Number | 1794-OV16P |
| Product Type | Protected Sink Output Module |
| Product Family | Flex I/O 1794 |
| Number of Outputs | 16 (protected, sinking) |
| Bulletin | 1794 |
| On-State Nominal Voltage | 24V DC |
| Current Rating | 8 A |
| Dimensions | 1.8 x 3.7 x 2.1 Inches |
| Maximum Off-State Voltage | 31.2V DC |
| Flexbus Current | 80 mA |
| Maximum Off-State Leakage | 0.5 mA |
| Maximum Power Dissipation | 4.2W at 31.2V DC |
| Maximum On-State Voltage Drop | 0.2V DC |
About 1794-OV16P
The 1794-OV16P Output Module is a protected sink output module manufactured by Allen-Bradley/Rockwell Automation. It belongs to the Flex I/O 1794 series and it has 16 non-isolated sinking outputs in a single group of 16. This module can be installed on the 1794-TB3 and 1794-TB3S terminal bases. The output current rating of the Allen-Bradley 1794-OV16P output module is 8 Amps and it has 16 outputs, each rated at 0.5 Amps. It comes with protected output-points, and electronic protection that turns off the module if there is an overload, short-circuit, or high-temperature condition. This module can automatically recover from shutdowns upon the removal of the faults, which means the fault status is not passed on to the processor. This module comes with approximate dimensions of 1.8 x 3.7 x 2.1 inches and a tolerable relative humidity range of 5 to 95% (non-condensing). It operates in an environmental temperature range of 0 to 55 degrees Celsius and a storage temperature range of -40 to 85 degrees Celsius.
The Allen-Bradley Flex I/O 1794-OV16P Protected Sink Output Module has 16 yellow field-side indicators and logic-driven status indicators. The on-state voltage rating of this output module is 24 Volts DC nominal, 10 Volts DC minimum, and 31.2 Volts DC maximum. This output module's minimum isolation voltage is 100 percent tested at 2121 Volts DC for 1 second between the operator and the system. Nevertheless, there is no isolation between the individual output channels. The 1794-OV16P Protected Sink Output Module has an on-state current rating of 1.0 milliamp per channel minimum and a maximum rating of 500 milliamps per channel. It also has a Flexbus current rating of 80 milliamps minimum with a 0.2 Volts DC on-state maximum voltage drop rating.
Allen-Bradley manufactures the 1794-OV16P Module as a protected sink output module with 16 sinking outputs and a nominal on-state voltage of 24 Volts DC. It has a current rating of 8.0 Amps and it operates with an on-state current of 500 milliamps per channel maximum and a 0.5 milliamps per channel minimum.
F.A.Q for 1794-OV16P
