GE / IP FANUC Series 90/30 In Stock
Home » Allen Bradley » Flex I/O » You are here: 1794-OC16
1794-OC16
Rockwell Disclaimer: The product is used surplus. PDF Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because PDF Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, PDF Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. PDF Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. PDF Supply also makes no representations as to your right to install any such firmware on the product. PDF Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
PDF Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with PDF Supply's 1-year, 2-year, or 3-year warranty.
Other Available Revisions for the 1794-OC16 1794-OC16//A
Common misspellings:
- l794-OC16
- 179A-OC16
- 1794-0C16
- 1794-OCl6
- 1794OC16
Technical Specifications for 1794-OC16
| Brand | Allen-Bradley / Rockwell Automation |
|---|---|
| Series | Flex I/O |
| Part number | 1794-OC16 |
| Product type | Output module |
| Outputs | 16 |
| Nominal output voltage | 48 Volts DC |
| Output current | 0.5 Amps |
| External power voltage range | 30 to 60 Volts DC |
| Relative humidity | 5 to 95% |
| Operating temperture | 0 to 55 degrees Celsius |
| Storage temperature | -40 to 85 degrees Celsius |
| Dimensions | 94 x 94 x 69 millimeters |
| Weight | 110 grams |
About 1794-OC16
The Allen-Bradley 1794-OC16 module is a Flex I/O 48 Volts DC rated output module. A total of 16 non-isolated sourcing outputs are available on the module. The terminal base units recommended for use with the I/O module are the 1794-TB3, 1794-TB3S, 1794-TB3K, and the 1794-TB3SK bases. The minimum output voltage is 30 Volts DC and the nominal output voltage is 48 Volts DC. The maximum output voltage at 45 degrees Celsius is 60 Volts DC and at 55 degrees Celsius, the maximum output voltage is 55 Volts DC. Each of the 16 outputs can source 0.5 Amps of current, leading to a total module current output of 8 Amps. The minimum on-state current level is 20 milliamps per channel and the maximum on-state current level is 500 milliamps per channel.
The surge current rating for the 1794-OC16 module is 4 Amps for 10 milliseconds each and this is repeatable every 2 seconds. The maximum off-state voltage is 60 Volts DC and the maximum off-state current leakage is 1 milliamp. The maximum on-state voltage drop is 1 Volt DC at 0.5 Amps. The module has been type tested at 1900 Volts DC for 1 second. No isolation is available on the 1794-OC16 module between the individual output channels. The maximum output signal delay for off to on is 0.5 milliseconds. The maximum on to off signal delay is 1 millisecond at 25 degrees Celsius and 2 milliseconds at 55 degrees Celsius. The dimensions of the 1794-OC16 module are 94 x 94 x 69 millimeters. The approximate weight of the 1794-OC16 module is 100 grams. The enclosure of the module is open.
The Allen-Bradley 1794-OC16 module is an output module. It belongs to the 1794 Flex I/O device family and it has 16 sourcing outputs.
F.A.Q for 1794-OC16
