GE / IP FANUC Series 90/30 In Stock
Home » Allen Bradley » Flex I/O » You are here: 1794-OB8EP
1794-OB8EP
Rockwell Disclaimer: The product is used surplus. PDF Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because PDF Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, PDF Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. PDF Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. PDF Supply also makes no representations as to your right to install any such firmware on the product. PDF Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
PDF Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with PDF Supply's 1-year, 2-year, or 3-year warranty.
Other Available Revisions for the 1794-OB8EP 1794-OB8EP//A
Common misspellings:
- l794-OB8EP
- 179A-OB8EP
- 1794-0B8EP
- 1794-O88EP
- 1794-OBbEP
- 1794OB8EP
Technical Specifications for 1794-OB8EP
| Brand | Allen-Bradley / Rockwell Automation |
|---|---|
| Series | Flex I/O |
| Part number | 1794-OB8EP |
| Product type | Output module |
| Module type | Digital |
| Number of outputs | 8 |
| Output type | Current, sourcing outputs |
| Voltage type | DC |
| Operating voltage | 19.2 to 31.2 Volts DC |
| Reset button | Included |
About 1794-OB8EP
The 1794-OB8EP Flex I/O output module from Allen-Bradley is an industrial output module that has 8 output points. This output module is a digital output module that uses DC power. The 1794-OB8EP Flex I/O output module is safe to use in European Hazardous Locations as long as it is installed in a protective enclosure, wired correctly, and used properly. It has been CE certified and it is safe for use in North American Hazardous Locations under the same criteria that are required for safe use in the European Hazardous Locations. The 1794-OB8EP output module is flexible enough to be installed on different kinds of terminal bases for use in different machines and applications. The compatible bases include the Allen-Bradley 1794-TB2, 1794-TB3, and the 1794-TB3S terminal bases.
The Allen-Bradley 1794-OB8EP Flex I/O output module comes with a reset button that can be used to reset the device after a fault has occurred in the system. Its 8 output points are current and sourcing output points. Its DC voltage ratings are 24 Volts DC nominal, 19.2 Volts DC minimum, and 31.2 Volts DC maximum. The output current ratings on the 1794-OB8EP output module are 2 Amps of maximum current per output point, and 10 Amps of maximum current per module (at 1.25 Amps per output point). The on-state current ratings for this module are 1 milliamp minimum per output and 2 Amps maximum per output. The maximum rated on-state voltage drop is 0.2 Volts DC. The 1794-OB8EP output module’s output signal delay is 0.1 milliseconds both from off to on and from on to off.
The Allen-Bradley 1794-OB8EP module is an 8-point output module from the Flex I/O series. It operates with DC voltage.
F.A.Q for 1794-OB8EP
