GE / IP FANUC Series 90/30 In Stock
Home » Allen Bradley » Flex I/O » You are here: 1794-OB16
1794-OB16
Rockwell Disclaimer: The product is used surplus. PDF Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because PDF Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, PDF Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. PDF Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. PDF Supply also makes no representations as to your right to install any such firmware on the product. PDF Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
PDF Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with PDF Supply's 1-year, 2-year, or 3-year warranty.
Product Description
The 1794-OB16 Flex I/O Digital Output Module is a 16-point current sourcing output module for the Allen-Bradley Flex I/O in-cabinet modular system. This module provides 16 non-isolated sourcing outputs with 24 Volts DC nominal voltage ratings and 500 milliamps current ratings per channel.
Other Available Revisions for the 1794-OB16 1794-OB16//A
Common misspellings:
- l794-OB16
- 179A-OB16
- 1794-0B16
- 1794-O816
- 1794-OBl6
- 1794OB16
Technical Specifications for 1794-OB16
| Brand | Allen-Bradley / Rockwell Automation |
|---|---|
| Series | Flex I/O |
| Part Number | 1794-OB16 |
| Description | Digital Output Module |
| Current Rating | 0.5 Amps Per Channel |
| Voltage Rating | 24 Volts DC |
| Number of Outputs | 16 Outputs |
| Output Type | Sourcing |
| Group Isolation | Yes |
| On-State Voltage Range | 10 to 31.2 Volts DC |
| On/Off Signal Delay Time | 1.0 Milliseconds |
| Enclosure | Open Type |
| Dimensions | 3.7 x 3.7 x 2.7 Inches |
About 1794-OB16
The 1794-OB16 Flex I/O Digital Output Module is a 16-point output module for the Allen-Bradley Flex I/O series of in-cabinet modular systems and components. This module provides 16 non-isolated current sourcing output channels in 2 groups of 8 channels each, with an on-state voltage range of 10 Volts DC to 31.2 Volts DC and an on-state current range of 1.0 milliamp to 500 milliamps per channel. The 1794-OB16 Output Module has an aggregate module output current capacity of 8 Amps (0.5 Amps per channel), and it has a maximum surge current rating of 2 Amps per channel for 50 milliseconds, and this is repeatable every 2 seconds. None of the 1794-OB16 Output Module’s outputs are fused, but it is recommended to use fuses to protect each output from over-currents by using the SAN-O MQ4 800-milliamp fuses.
The 1794-OB16 Output Module has a maximum off-state leakage current of 0.5 milliamps and a maximum signal delay time of 0.5 milliseconds from off to on and one of 1.0 millisecond from on to off. Like every Flex I/O module, the 1794-OB16 Output Module requires an external 24 Volts DC rated power source for operation. It has an acceptable operating voltage range of 18 to 31.2 Volts DC with 80 milliamps of maximum Flexbus current at 5 Volts DC, and a maximum power dissipation rating of 5.3 Watts at 31.2 Volts DC. The 1794-OB16 Output Module is installed on a terminal base with the adapter/power supply module, and it supports only the following Flex I/O terminal base units: the 1794-TB2, 1794-TB3,1794-TB3S, 1794-TB3K, and the 1794-TB3SK. The 1794-OB16 Output Module has 16 yellow status indicators that show the field-side status of each output channel, and it comes with an open-style design.
The 1794-OB16 Flex I/O Digital Output Module is a 16-point current sourcing output module for the Allen-Bradley Flex I/O in-cabinet modular system. This module provides 16 non-isolated sourcing outputs with 24 Volts DC nominal voltage ratings and 500 milliamps current ratings per channel.
F.A.Q for 1794-OB16
