GE / IP FANUC Series 90/30 In Stock
Home » Allen Bradley » Flex I/O » You are here: 1794-OA8I
1794-OA8I
Rockwell Disclaimer: The product is used surplus. PDF Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because PDF Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, PDF Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. PDF Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. PDF Supply also makes no representations as to your right to install any such firmware on the product. PDF Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
PDF Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with PDF Supply's 1-year, 2-year, or 3-year warranty.
Product Description
The Allen-Bradley 1794-OA8I output module is part of the Flex I/O series that runs on AC power and that can operate in hazardous locations. It operates with a voltage range from 85 to 132 Volts AC.
Other Available Revisions for the 1794-OA8I 1794-OA8I//A
Common misspellings:
- l794-OA8I
- 179A-OA8I
- 1794-0A8I
- 1794-OAbI
- 1794-OA81
- 1794-OA8l
- 1794OA8I
Technical Specifications for 1794-OA8I
| Brand | Allen-Bradley / Rockwell Automation |
|---|---|
| Series | Flex I/O |
| Part number | 1794-OA8I |
| Product type | Output module |
| Number of outputs | 8 |
| Voltage type | AC |
| Nominal voltage | 120 Volts AC |
| Operating voltage | 85 to 132 Volts AC |
| Environmental rating | North American hazardous location approval rating |
| Multiple power sources | Supported |
About 1794-OA8I
The 1794-OA8I output module is a Flex I/O series output module that has been designed and manufactured by Allen-Bradley/Rockwell Automation. This output module is a digital output module that uses AC power to operate. The 1794-OA8I digital output module can operate in any industrial environment that is rated as a Class 1, Division 2, Groups A, B, C, and D type of environment, and it has a North American hazardous location approval rating. Always install the output module in a suitable enclosure to protect it from common hazardous substances in industrial settings and to ensure that will last as long as possible. The 1794-OA8I digital output module can accept power from multiple sources, but the users must make sure that the total voltage from all of these sources does not exceed the specified isolation voltage rating.
The Allen-Bradley/Rockwell Automation 1794-OA8I Flex I/O digital output module can be installed on the Allen-Bradley 1794-TB2, 1794-TB3, and 1794-TB3S terminal base units. These terminal bases and the output module, along with an adapter, form a complete Flex I/O system, and these terminal bases are also the place where most of the wiring connections for the whole system and the output module are made. This wiring setup makes it possible to disconnect, service, or replace the 1794-OA8I digital output module easily without disrupting the wiring or needing to disconnect and then reconnect a large number of wires. The voltage ratings of the 1794-OA8I output module are 120 Volts AC nominal voltage, 85 Volts AC minimum voltage, and 132 Volts AC maximum voltage.
The Allen-Bradley 1794-OA8I output module is part of the Flex I/O series that runs on AC power and that can operate in hazardous locations. It operates with a voltage range from 85 to 132 Volts AC.
F.A.Q for 1794-OA8I
