GE / IP FANUC Series 90/30 In Stock
Home » Allen Bradley » Flex I/O » You are here: 1794-IR8
1794-IR8
Rockwell Disclaimer: The product is used surplus. PDF Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because PDF Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, PDF Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. PDF Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. PDF Supply also makes no representations as to your right to install any such firmware on the product. PDF Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
PDF Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with PDF Supply's 1-year, 2-year, or 3-year warranty.
Other Available Revisions for the 1794-IR8 1794-IR8//A
Common misspellings:
- l794-IR8
- 179A-IR8
- 1794-1R8
- 1794-lR8
- 1794-IRb
- 1794IR8
Technical Specifications for 1794-IR8
| Brand | Allen-Bradley / Rockwell Automation |
|---|---|
| Series | Flex I/O |
| Part number | 1794-IR8 |
| Type | RTD Module |
| Inputs | 8 |
| Module location | Terminal base |
| Resolution | 16 bits accross 435 Ohms |
| Overvoltage capacity | 35V DC, 25V AC continuout at 25°C |
| Transient voltage | 250 Volts |
| Indicators | 1 red/green indicator |
| Supply voltage | 24V DC |
| Dimensions | 1.8 x 3.7 x 2.1 mm |
| Temperature | 0 to 55 degrees Celsius (32 to 131 degrees Fahrenheit) |
About 1794-IR8
The 1794-IR8 module is an RTD module that has been manufactured in the Allen-Bradley FLEX I/O series system as an industrial solution for devices in the control industry. The 1794-IR8 module has been manufactured by Allen-Bradley/Rockwell Automation. This specific module is a small and modular input device that can be used with applications that perform rack-based functions. This module comes shipped with its own adapter/power supply and the terminal base that it mounts on. The module also contains the bus interface and circuitry needed to perform all of its functions. The Allen-Bradley/Rockwell Automation 1794-IR8 RTD module works as a block transfer module that can interact with analog signals with any of the Allen-Bradley programmable controllers that come with block transfer capabilities.
The adapter and power supply transfers data to the Allen-Bradley/Rockwell Automation 1794-IR8 RTD module and directly from this module by using specialized instructions (BTW and BTR instructions) in a ladder diagram program. The main objective of these instructions is to obtain input values from the module and to establish the mode of operation. The Allen-Bradley/Rockwell Automation 1794-IR8 RTD module operates with 8 inputs and it is meant to be installed on a terminal base. It has a resolution of 16 bits across 435 Ohms and it operates with a peak transient voltage of 250 Volts. The module comes with a status indicator that can be red or green and it requires a supply voltage of 24 Volts DC nominal. This status indicator can indicate a critical fault, a non-critical fault, a fully operational and configured module, a functional but not configured module, and a non-powered module.
The Allen-Bradley/Rockwell Automation 1794-IR8 RTD module is an industrial module. It is meant to be installed on a terminal base and it comes with 8 inputs and 1 status indicator.
F.A.Q for 1794-IR8
