GE / IP FANUC Series 90/30 In Stock
Home » Allen Bradley » Flex I/O » You are here: 1794-IJ2XT
1794-IJ2XT
Rockwell Disclaimer: The product is used surplus. PDF Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because PDF Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, PDF Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. PDF Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. PDF Supply also makes no representations as to your right to install any such firmware on the product. PDF Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
PDF Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with PDF Supply's 1-year, 2-year, or 3-year warranty.
Other Available Revisions for the 1794-IJ2XT 1794-IJ2XT//A
Common misspellings:
- l794-IJ2XT
- 179A-IJ2XT
- 1794-1J2XT
- 1794-lJ2XT
- 1794IJ2XT
Technical Specifications for 1794-IJ2XT
| Brand | Allen-Bradley / Rockwell Automation |
|---|---|
| Series | Flex I/O |
| Part number | 1794-IJ2XT |
| Type | Input frequency module |
| Inputs | 2 |
| Inputs frequency | 1 to 32 kHz |
| Input pulse width | 20 us |
| On-state current | from 2.0 mA nom. to 10.0 mA max. |
| Indicators | Yes |
| Voltage | 24V DC |
| Operating temperature | -20 to 70 degrees Celsius |
| Relative humidity | 5 to 95% |
| Power Supply | 24V DC |
About 1794-IJ2XT
The 1794-IJ2XT input module is a FLEX I/O input module that has been manufactured and introduced to the automation industry by Allen-Bradley. This module provides 2 inputs that can be used as frequency and gate input channels and that are mainly used to establish directions. This module comes with a maximum frequency range 1 to 32 Kilohertz and a frequency value of 32,767 or 3,276.7 depending on the range that is used. The input pulse width rating of the module is 20 microseconds. The Allen-Bradley 1794-IJ2XT FLEX I/O input module is limited to an on-stage isolated power supply of 24 Volts DC and it operates with an on-state current of 2 milliamps minimum and 10 milliamps maximum.
The Allen-Bradley 1794-IJ2XT FLEX I/O input module’s physical parts include an input indicator, an insertable label for writing individual I/O assignments, a wire-off fault indicator, an output indicator, and a power/status indicator. This module can be mounted on a terminal base from the same series. The steps for installing the module are to rotate the keyswitch on the terminal base, push the Flexbus connector to the left, and to make sure the pins on the bottom of the module are straight. Next, the module needs to be positioned and aligned and pressed firmly down to seat it securely in the terminal base. The Allen-Bradley 1794-IJ2XT FLEX I/O input module’s status indicator glows solid green during the power up process to indicate that the power supply is operating properly and that the internal tests have been performed properly. If this status indicator is red, it means the module is experiencing a fault or an error.
The Allen-Bradley 1794-IJ2XT FLEX I/O input module is an input frequency module. It comes with 2 inputs that operate at a frequency of 1 to 32 kilohertz.
F.A.Q for 1794-IJ2XT
