GE / IP FANUC Series 90/30 In Stock
Home » Allen Bradley » Flex I/O » You are here: 1794-IF4ICFXT
1794-IF4ICFXT
Rockwell Disclaimer: The product is used surplus. PDF Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because PDF Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, PDF Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. PDF Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. PDF Supply also makes no representations as to your right to install any such firmware on the product. PDF Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
PDF Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with PDF Supply's 1-year, 2-year, or 3-year warranty.
Other Available Revisions for the 1794-IF4ICFXT 1794-IF4ICFXT//A
Common misspellings:
- l794-IF4ICFXT
- 179A-IF4ICFXT
- 1794-1F4ICFXT
- 1794-lF4ICFXT
- 1794-IFAICFXT
- 1794-IF41CFXT
- 1794-IF4lCFXT
- 1794IF4ICFXT
Technical Specifications for 1794-IF4ICFXT
| Brand | Allen-Bradley / Rockwell Automation |
|---|---|
| Series | Flex I/O |
| Part number | 1794-IF4ICFXT |
| Type | Isolated analog input module |
| Inputs | 4 isolated inputs |
| Isolation | Yes |
| Resolution | 16 bits, unipolar |
| Input current | 4 to 20 mA |
| Input resistance | >10 M Ohms <1000 Ohms |
| Conversion type | Sigma delta |
| Wire tyoe | Shielded |
| Operating temperature | -20 to 70 degrees Celsius |
| Voltage | 24V DC |
About 1794-IF4ICFXT
The 1794-IF4ICFXT module is a Flex I/O isolated analog input module that has been designed and manufactured by Allen-Bradley/Rockwell Automation. This specific input module comes with 4 isolated inputs that provide safe connections and these inputs are isolated from one another. These inputs are compatible with all equipment that shares the same or similar approximate specifications. Unlike other input modules, this module comes with an “OK” status indicator that can glow red and green depending on the situation. The indicator glows green if the module is operating normally and it glows red if there is an error. The Allen-Bradley/Rockwell Automation 1794-IF4ICFXT isolated analog input module operates with a unipolar resolution of 16 bits and an input current rating of 4 to 20 milliamps. The module also uses the sigma-delta conversion type. Modules of this kind usually do not require any kind of calibration before use.
The Allen-Bradley/Rockwell Automation 1794-IF4ICFXT isolated analog input module comes with 3 additional parameters that enable control of the way that analog signals can be processed by the module. These parameters apply to inputs that are set to operate with 150 Hertz, 300 Hertz, and 600 Hertz frequency. The Allen-Bradley/Rockwell Automation 1794-IF4ICFXT isolated analog input module needs to be mounted on a compatible 1794 product line terminal base. The keyswitch that comes with the module needs to be rotated clockwise to position three, and the Flexbus connector needs to be pushed to the left. The pins on the bottom of the module need to be straight and the module needs to be pressed firmly down to be set into the terminal base.
The Allen-Bradley/Rockwell Automation 1794-IF4ICFXT module is an isolated analog input module. It operates with a voltage of 24 Volts DC and it has a unipolar resolution of 16 bits.
F.A.Q for 1794-IF4ICFXT
