GE / IP FANUC Series 90/30 In Stock
Home » Allen Bradley » Flex I/O » You are here: 1794-IF2XOF2I
1794-IF2XOF2I
Rockwell Disclaimer: The product is used surplus. PDF Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because PDF Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, PDF Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. PDF Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. PDF Supply also makes no representations as to your right to install any such firmware on the product. PDF Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
PDF Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with PDF Supply's 1-year, 2-year, or 3-year warranty.
Other Available Revisions for the 1794-IF2XOF2I 1794-IF2XOF2I//A
Common misspellings:
- l794-IF2XOF2I
- 179A-IF2XOF2I
- 1794-1F2XOF2I
- 1794-lF2XOF2I
- 1794-IF2X0F2I
- 1794-IF2XOF21
- 1794-IF2XOF2l
- 1794IF2XOF2I
Technical Specifications for 1794-IF2XOF2I
| Brand | Allen-Bradley / Rockwell Automation |
|---|---|
| Series | Flex I/O |
| Part number | 1794-IF2XOF2I |
| Product type | I/O combination module |
| Number of inputs | 2 |
| Number of outputs | 2 |
| Power source | External power source |
| Voltage type | DC |
| Nominal input voltage | 24 Volts DC |
| Ladder logic calibration | Supported |
About 1794-IF2XOF2I
The Allen-Bradley 1794-IF2XOF2I I/O module is a combination module from the Allen-Bradley Flex I/O series. It comes with 2 input points and 2 output points, and all of the input and output points are isolated. The 1794-IF2XOF2I combination I/O module draws its power from an external source that supplies it with 24 Volts DC nominal voltage. It is an analog I/O module. Its primary purpose is to handle block transfer applications. The 1794-IF2XOF2I combination I/O module can interface analog signals with any kind of Allen-Bradley controller that is compatible with analog signals and block transfers. Block transfers include the transfer of output data in the form of words from a designated place in the processor data table to the I/O module’s memory and the transfer of input data from the I/O module’s memory to a designated space in the processor data table.
The Allen-Bradley 1794-IF2XOF2I Flex I/O combination module can be custom labeled by the users because it comes with a removable label that the users can write on and remove or update later if necessary. It uses a keyswitch to mount securely onto a terminal base unit and to make sure that it can only be mounted on the right kind of terminal base unit. The 1794-IF2XOF2I combination module is compatible with a variety of terminal bases, including the 1794-TB3, 1794-TB3S, 1794-TB3TS, and 1794-TBT terminal base models. It can be calibrated with ladder logic, but the ladder logic must be entered into the processor memory of the connected controller first to make sure that the controller can initiate BTWs and send them to the module and that the module can send input data to the controller that the processor can read.
The 1794-IF2XOF2I I/O module is an Allen-Bradley Flex I/O series combination module that features 2 inputs and 2 outputs. This analog combination module can handle a variety of block transfer applications with different compatible Allen-Bradley controllers.
F.A.Q for 1794-IF2XOF2I
