GE / IP FANUC Series 90/30 In Stock
Home » Allen Bradley » Flex I/O » You are here: 1794-IE8XT
1794-IE8XT
Rockwell Disclaimer: The product is used surplus. PDF Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because PDF Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, PDF Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. PDF Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. PDF Supply also makes no representations as to your right to install any such firmware on the product. PDF Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
PDF Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with PDF Supply's 1-year, 2-year, or 3-year warranty.
Other Available Revisions for the 1794-IE8XT 1794-IE8XT//A1794-IE8XT//B
Common misspellings:
- l794-IE8XT
- 179A-IE8XT
- 1794-1E8XT
- 1794-lE8XT
- 1794-IEbXT
- 1794IE8XT
Technical Specifications for 1794-IE8XT
| Brand | Allen-Bradley / Rockwell Automation |
|---|---|
| Series | Flex I/O |
| Part number | 1794-IE8XT |
| Type | Analog input module |
| Inputs | 8 single-ended inputs |
| Isolation | No |
| Voltage | 24V DC |
| Keyswitch | 3 |
| Input impedance | 100k Ohms |
| Dimensions | 45.7 x 94 x 53.3 mm |
| Indicators | 1, green |
| Calibration | None required |
| Flexbus current | 60 mA |
About 1794-IE8XT
The 1794-IE8XT module is a FLEX I/O high-density input module that has been included in the 1794 line of high-density analog modules by Allen-Bradley. This module comes with 8 different inputs that make it able to operate with different input modules as long as they both are compatible. This input module operates with an external DC power supply rated at 24 Volts DC nominal and a FlexBus current of 60 milliamps. This module also has a DC power supply voltage range of 19.2 to 31.2 Volts DC. Before the Allen-Bradley 1794-IE8XT high-density input module is installed, it is important to calculate the power requirements of all the modules that are going to be installed in the same chassis. Verify that the module is installed in a proper enclosure that provides sufficient protection according to the type of environment where it is going to operate. Additionally, the keyswitch needs to be positioned properly in the terminal base. This module’s keyswitch comes with 3 positions.
The Allen-Bradley 1794-IE8XT FLEX I/O high-density input module’s wiring requirements will be determined by the level of current draw through the terminal base. This procedure should be done by an expert to avoid problems and potential damage to both the module and the base. The installation of the module consists of mounting the module, the installation of the module onto the terminal base unit, and the connection of the wiring for the module to the terminal base unit. The Allen-Bradley 1794-IE8XT high-density input module comes with 1 green indicator LED and no calibration is required before operation. The dimensions of the module consist of 45.7 x 94 x 53.3 millimeters.
The Allen-Bradley 1794-IE8XT high-density input module is part of the Flex I/O series. It operates with a nominal voltage of 24 Volts DC and it has 1 green indicator.
F.A.Q for 1794-IE8XT
