GE / IP FANUC Series 90/30 In Stock
Home » Allen Bradley » Flex I/O » You are here: 1794-IE8XOE4
1794-IE8XOE4
Rockwell Disclaimer: The product is used surplus. PDF Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because PDF Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, PDF Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. PDF Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. PDF Supply also makes no representations as to your right to install any such firmware on the product. PDF Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
PDF Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with PDF Supply's 1-year, 2-year, or 3-year warranty.
Other Available Revisions for the 1794-IE8XOE4 1794-IE8XOE4//A
Common misspellings:
- l794-IE8XOE4
- 179A-IE8XOE4
- 1794-1E8XOE4
- 1794-lE8XOE4
- 1794-IEbXOE4
- 1794-IE8X0E4
- 1794-IE8XOEA
- 1794IE8XOE4
Technical Specifications for 1794-IE8XOE4
| Brand | Allen-Bradley / Rockwell Automation |
|---|---|
| Series | Flex I/O |
| Part number | 1794-IE8XOE4 |
| Type | Analog I/O module |
| Inputs | 8 single-ended |
| Isolation | None |
| Voltage | 24 Volts DC |
| Function | Block transfer module |
| Power indicator | Yes |
| Keyswitch | Yes |
| Mounting | Terminal base unit |
| Conversion type | 8.0 ms |
| Outputs | 4 |
About 1794-IE8XOE4
The 1794-IE8XOE4 module is a FLEX I/O analog input module that has been designed by Allen-Bradley/Rockwell Automation and included in the 1794 product line of FLEX modules. This specific module has been designed to operate within steady, standard environmental temperature ranges and it comes with both inputs and outputs so it can operate with both input equipment and output equipment as long as the equipment used is compatible. The Allen-Bradley/Rockwell Automation 1794-IE8XOE4 FLEX I/O analog input module consists of a block transfer module whose main objective is to exchange signals with any of the Allen-Bradley/Rockwell Automation programmable controllers, especially those that come with a block transfer capability and are compatible with the specifications of the module.
The Allen-Bradley/Rockwell Automation 1794-IE8XOE4 FLEX I/O analog input module can be mounted on the module and on a panel or wall with a few screws to hold it firmly in place. This module has 8 single-ended and non-isolated inputs and it comes with 4 non-isolated outputs. The Allen-Bradley/Rockwell Automation 1794-IE8XOE4 FLEX I/O analog input module comes with a power indicator LED and a keyswitch position indicator LED. This module operates with a voltage of 24 Volts DC. The input impedance of the module is between 1 Megaohm and 100 Ohms. Each of the outputs operates with a maximum current of 0 to 20 milliamps and a voltage-current load of 3 milliamps. These outputs have a current resolution of 0.641 microamps per count. The module has a resistive load of 0 to 750 Ohms at a voltage of 24 Volts DC.
The Allen-Bradley/Rockwell Automation 1794-IE8XOE4 Flex I/O analog input module comes with 8 single-ended and non-isolated inputs and it works as a block transfer module.
F.A.Q for 1794-IE8XOE4
