GE / IP FANUC Series 90/30 In Stock
Home » Allen Bradley » Flex I/O » You are here: 1794-IC16
1794-IC16
Rockwell Disclaimer: The product is used surplus. PDF Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because PDF Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, PDF Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. PDF Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. PDF Supply also makes no representations as to your right to install any such firmware on the product. PDF Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
PDF Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with PDF Supply's 1-year, 2-year, or 3-year warranty.
Other Available Revisions for the 1794-IC16 1794-IC16//A
Common misspellings:
- l794-IC16
- 179A-IC16
- 1794-1C16
- 1794-lC16
- 1794-ICl6
- 1794IC16
Technical Specifications for 1794-IC16
| Brand | Allen-Bradley / Rockwell Automation |
|---|---|
| Series | Flex I/O |
| Part number | 1794-IC16 |
| Product type | Input module |
| Number of inputs | 16 |
| Voltage type | DC |
| Adjustable filter time | Supported |
| Operating temperature | 32 to 131 degrees Fahrenheit |
| CE certified | Yes |
| Input types | Sinking, non-isolated |
About 1794-IC16
The 1794-IC16 input module is a member of the Flex I/O series of input and output modules that are manufactured by Allen-Bradley. The 1794-IC16 input module runs on DC power and it is CE certified. It has 16 input points. It is compatible with different Allen-Bradley terminal bases that include the 1794-TB2, the 1794-TB3, and the 1794-TB3S terminal bases. Most of the input wiring connections for the 1794-IC16 input module are made on the terminal base, and these connections can be 2-wire connections or 3-wire connections. The screw torque rating that the module needs will depend on the terminal base that is used. This module has a built-in 1-millisecond filter and the filter time is adjustable.
The Allen-Bradley Flex I/O 1794-IC16 input module is made to operate in an environment with an ambient air temperature between 32 and 131 degrees Fahrenheit or 0 and 55 degrees Celsius. Its 16 inputs are sinking inputs and they are not isolated. It has on-state current ratings of 2 Amps minimum at 30 Volts DC, 5 Amps nominal at 48 Volts DC, and 7 Amps maximum at 60 Volts DC. The minimum off-state current rating is 1.5 milliamps. The maximum off-state voltage rating for the 1794-IC16 input module is 10 Volts DC, while the module’s on-state voltage ratings are 30 Volts DC minimum, 48 Volts DC nominal, and 60 Volts DC maximum. It dissipates up to 6.4 Watts of power at 60 Volts DC and up to 21.9 BTU/hour as heat at 60 Volts DC.
The Allen-Bradley 1794-IC16 input module is a 16-point Flex I/O series module. It is a DC input module that has an adjustable filter time and that can be installed on a variety of different terminal bases.
F.A.Q for 1794-IC16
