GE / IP FANUC Series 90/30 In Stock
Home » Allen Bradley » Flex I/O » You are here: 1794-IA8K
1794-IA8K
Rockwell Disclaimer: The product is used surplus. PDF Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because PDF Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, PDF Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. PDF Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. PDF Supply also makes no representations as to your right to install any such firmware on the product. PDF Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
PDF Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with PDF Supply's 1-year, 2-year, or 3-year warranty.
Other Available Revisions for the 1794-IA8K 1794-IA8K//A
Common misspellings:
- l794-IA8K
- 179A-IA8K
- 1794-1A8K
- 1794-lA8K
- 1794-IAbK
- 1794IA8K
Technical Specifications for 1794-IA8K
| Brand | Allen-Bradley / Rockwell Automation |
|---|---|
| Series | Flex I/O |
| Part Number | 1794-IA8K |
| Description | Digital I/O module |
| Voltage | 85 to 125 Volts AC |
| Inputs | 8 inputs |
| Power dissipation | 4.5 Watts |
| Thermal dissipation | 15.2 BTU/hr |
| Input impedance | 10.6 kiloohms |
| Flexbus current | 30 milliamps |
| Temperature | 0 to 55 degrees Celsius |
About 1794-IA8K
The 1794-IA8K input module is an Allen-Bradley digital I/O module. This conformally-coated module runs with an input voltage range of 85 to 125 Volts AC. The conformal coating of the module meets the industrial noxious gas resistance requirements for safe operation in a Class G3 environment. The module has 8 isolated inputs. The on-state input voltage rating of the module is 65 Volts AC and the on-state input current rating is 12 milliamps with 120 Volts AC nominal voltage and 60 Hertz frequency. The 1794-IA8K input module has a total power dissipation of 4.5 watts with voltage rating of 132 Volts AC maximum. The thermal dissipation rating of the input module is 15.2 BTU per hour with the same voltage rating. The module has an input impedance rating of 10.6 K ohms. This input module is sensitive to electrostatic discharge that can cause damage to its internal parts and affect its performance.
The Allen-Bradley 1794-IA8K input module has a Flexbus current rating of 30 milliamps. For isolation voltage, the module has been tested with up to 2150 Volts DC for 1 second between the user power supply and the system. No isolation is present between the individual input channels. The operating temperature for the module should be set between 0 and 55 degrees Celsius and the module can be stored within a temperature range of -40 to 85 degrees Celsius. The 1794-IA8K input module has a status indicator light on the front side that shows the flow of power in the module and the operating status of the input module. The module has surge transient immunity and conducted RF immunity as per the IEC guidelines for both signal and power ports.
The 1794-IA8K input module is an Allen-Bradley-manufactured I/O module. It has a voltage rating of 85 to 125 Volts AC.
F.A.Q for 1794-IA8K
