GE / IP FANUC Series 90/30 In Stock
Home » Allen Bradley » Flex I/O » You are here: 1794-APBDPV1
1794-APBDPV1
Rockwell Disclaimer: The product is used surplus. PDF Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because PDF Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, PDF Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. PDF Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. PDF Supply also makes no representations as to your right to install any such firmware on the product. PDF Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
PDF Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with PDF Supply's 1-year, 2-year, or 3-year warranty.
Other Available Revisions for the 1794-APBDPV1 1794-APBDPV1//A
Common misspellings:
- l794-APBDPV1
- 179A-APBDPV1
- 1794-AP8DPV1
- 1794-APBDPVl
- 1794APBDPV1
Technical Specifications for 1794-APBDPV1
| Brand | Allen-Bradley / Rockwell Automation |
|---|---|
| Series | Flex I/O |
| Part number | 1794-APBDPV1 |
| Voltage | 24 Volts DC |
| I/O module capacity | 8 modules |
| Input current | 385 milliAmps (maximum) |
| Inrush current | 23 Amps for 2 milliseconds |
| Communication rate | 12 megabits per second (maximum) |
| Flexbus output current | 640 milliAmps at 5 Volts DC (maximum) |
| Power dissipation | 4.2 Watts (maximum) |
| Thermal dissipation | 14 BTU per hour |
| Enclosure | Open-style (none) |
| Operating temperature | 0 to 55 degrees Celsius (32 to 131 degrees Fahrenheit) |
| Storage temperature | -40 to 85 degrees Celsius (-40 to 185 degrees Fahrenheit) |
About 1794-APBDPV1
The catalog number 1794-APBDPV1 is an order reference for a FLEX I/O PROFIBUS communications adapter module that is designed and produced by Allen-Bradley/Rockwell Automation. The adapter module is CE marked and it is built according to all of the relevant standards for industrial equipment. The 1794-APBDPV1 adapter module is equipped with status indicators and it has parts like module connectors, power connections, and node address thumbwheel switches. The adapter module installs easily on a DIN rail due to its precise latching mechanism and locking tabs. The indicators include the module status indicator and the PROFIBUS indicator and they can glow red and green.
The 1794-APBDPV1 adapter module has approximate dimensions which include a height of 87 millimeters (3.4 inches), a width of 69 millimeters (2.7 inches), and a depth of 69 millimeters (2.7 inches). The weight of the adapter is around 144 grams or 5 pounds. According to IEC standards, the operating temperature is between 0 and 55 degrees Celsius (32 and 131 degrees Fahrenheit). In addition to that, the adapter should be stored in a temperature range of -40 to 85 degrees Celsius (-40 to 185 degrees Fahrenheit). The 1794-APBDPV1 adapter has an open enclosure and it requires 22 to 12 AWG solid or stranded copper wire. Additionally, the adapter has a power dissipation of a maximum of 14 BTU per hour at 19.2 Volts DC and a Flexbus output current of 640 milliAmps. The isolation voltage of the adapter is 50 Volts for the basic insulation type. The PROFIBUS adapters are used with standard drop cable and a 9-pin D-shell connector plug. The 1794-APBDPV1 adapter carries a T4 temperature code rating according to the ATEX and North American standards.
The 1794-APBDPV1 communication adapter is a PROFIBUS component designed by Allen-Bradley/Rockwell Automation and intended for the FLEX I/O systems. The adapter has an input current of 385 milliAmps and an input voltage of 24 Volts DC. The inrush current of the adapter is 23 Amps for 2 milliseconds and its output current for Flexbus is 640 milliAmps at 5 Volts DC. The I/O capacity of the adapter is 8 I/O modules.
F.A.Q for 1794-APBDPV1
