GE / IP FANUC Series 90/30 In Stock
Home » Allen Bradley » Flex I/O » You are here: 1794-AENTRXT
1794-AENTRXT
Rockwell Disclaimer: The product is used surplus. PDF Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because PDF Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, PDF Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. PDF Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. PDF Supply also makes no representations as to your right to install any such firmware on the product. PDF Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
PDF Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with PDF Supply's 1-year, 2-year, or 3-year warranty.
Other Available Revisions for the 1794-AENTRXT 1794-AENTRXT//A
Common misspellings:
- l794-AENTRXT
- 179A-AENTRXT
- 1794AENTRXT
Technical Specifications for 1794-AENTRXT
| Brand | Allen-Bradley / Rockwell Automation |
|---|---|
| Series | Flex I/O |
| Part number | 1794-AENTRXT |
| Voltage | 24 Volts DC |
| Maximum module capacity | 8 |
| Communication protocol | EtherNet/IP |
| Power dissipation | 6.1 Watts at 19.2 Volts DC |
| Mounting | DIN rail |
| I/O configuration | RSLogix 5000 |
| Supported modes | Half/full duplex 10-megabit/100-megabit operation |
| Firmware version | 1.xx or higher |
| Status indicators | Module status, Network status and Link status for both links |
| Dimensions (HxWxD) | 87.4 x 94 x 92 millimeters (3.4 x 3.7 x 3.6 inches) |
About 1794-AENTRXT
The 1794-AENTRXT adapter module is a Series A component that is manufactured by Allen-Bradley/Rockwell Automation. This I/O EtherNet/IP adapter module has dual ports and it is available through the FLEX I/O series. The module has several status indicators and parts like a locking tab, connectors for Flexbus and RJ45 connections, switches for the IP address, and power connections. The 1794-AENTRXT module is intended for mounting on a DIN rail and it has the following dimensions (HxWxD): 87.4 x 94 x 92 millimeters (3.4 x 3.7 x 3.6 inches). The specified power wiring cable length for the module is 10 meters (32.8 feet) maximum. The status indicators on the module show when the I/O is being transmitted or received at the speed of 100 megabits or 10 megabits. Additionally, the status indicators show if links exist.
The module status indicators indicate if the correct power is supplied to the 1794-AENTRXT adapter module and if the adapter is properly configured. Besides that, the 1794-AENTRXT module has an indicator for the status of the network which checks everything related to the IP address. The indicators will either be flashing or glowing in a solid state and they will glow or flash green, yellow, or red light, depending on the status of the module. The 1794-AENTRXT adapter module has an 8-module host capacity and a communication rate of 10/100 megabits per second. The module has an open enclosure and a nominal input voltage of 24 Volts DC. The inrush current of the 1794-AENTRXT module is 18 Amps for 2 milliseconds and the maximum Flexbus output current is 640 milliamps at 5 Volts DC. The isolation voltage of the unit is 50 Volts (continuous).
The 1794-AENTRXT dual port EtherNet/IP adapter module by Allen-Bradley/Rockwell Automation is part of the FLEX I/O series and it has a communication rate of 10/100 megabits per second. The module has an input voltage of 24 Volts DC and an isolation voltage of 50 Volts continuous. The module dissipates power at a rate of 6.1 Watts and it uses a DIN rail for mounting.
F.A.Q for 1794-AENTRXT
