GE / IP FANUC Series 90/30 In Stock
Home » Allen Bradley » Flex I/O » You are here: 1794-AENTR
1794-AENTR
Rockwell Disclaimer: The product is used surplus. PDF Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because PDF Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, PDF Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. PDF Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. PDF Supply also makes no representations as to your right to install any such firmware on the product. PDF Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
PDF Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with PDF Supply's 1-year, 2-year, or 3-year warranty.
Product Description
The 1794-AENTR module is an Allen-Bradley/Rockwell Automation component used for FLEX I/O systems. The module has a voltage rating of 24 Volts DC and it supports a maximum of 8 terminal bases. The module communicates through the EtherNet/IP network and it mounts on a DIN rail. The module is configured through the RSLogix 5000 software and it has a firmware version of 1.xx or higher. The module operates in half/full duplex mode with a speed of 10 megabits or 100 megabits.
Other Available Revisions for the 1794-AENTR 1794-AENTR//A1794-AENTR//B
Common misspellings:
- l794-AENTR
- 179A-AENTR
- 1794AENTR
Technical Specifications for 1794-AENTR
| Brand | Allen-Bradley / Rockwell Automation |
|---|---|
| Series | Flex I/O |
| Part number | 1794-AENTR |
| Voltage | 24 Volts DC |
| Maximum module capacity | 8 |
| Communication protocol | EtherNet/IP |
| Power dissipation | 7.1 Watts at 19.2 Volts DC |
| Mounting | DIN rail |
| I/O configuration | RSLogix 5000 |
| Supported mode | Half/full duplex 10-megabit/100-megabit operation |
| Firmware version | 1.xx or higher |
| Status indicators | Module status, Network status, and Link status for both links |
| Dimensions (HxWxD) | 87.4 x 94 x 92 millimeters (3.4 x 3.7 x 3.6 inches) |
About 1794-AENTR
The 1794-AENTR dual port EtherNet/IP adapter module is designed and produced by Allen-Bradley/Rockwell Automation and it is part of the Allen-Bradley/Rockwell Automation FLEX I/O series. The 1794-AENTR module is intended as a means for communication between an Ethernet/IP control system and FLEX I/O devices. The module is part of a FLEX I/O system which offers modularity and flexibility, allowing the system to be used for a variety of applications. The complete FLEX I/O module is made to be installed on a rack and it is built with components like an adapter, terminal base, and I/O module. The I/O module has a special bus interface and all the circuitry required for operation. Some of the features of the 1794-AENTR module are DIN rail mounting, RSLinx supported communication, half/full duplex 10-megabit or 100-megabit operation, and advanced interfacing through Category 5-rated twisted pair cable.
The 1794-AENTR module does not require network scheduling and routing tables. The 1794-AENTR module operates on an input voltage of 24 Volts DC and it has a maximum capacity of 8 modules. The 1794-AENTR module has components like the FlexBus connector, IP address switches, 24 Volts DC connections and common connections, the module locking tab, the MAC ID label, the network cable RJ45 connectors, and the status indicators. The FLEX I/O system is small and its components are all compact and rugged. The 1794-AENTR module has a height of 87.4 millimeters (3.4 inches), a width of 94 millimeters (3.7 inches), and a depth of 92 millimeters (3.6 inches).
The 1794-AENTR module is an Allen-Bradley/Rockwell Automation component used for FLEX I/O systems. The module has a voltage rating of 24 Volts DC and it supports a maximum of 8 terminal bases. The module communicates through the EtherNet/IP network and it mounts on a DIN rail. The module is configured through the RSLogix 5000 software and it has a firmware version of 1.xx or higher. The module operates in half/full duplex mode with a speed of 10 megabits or 100 megabits.
F.A.Q for 1794-AENTR
