GE / IP FANUC Series 90/30 In Stock
Home » Allen Bradley » Flex I/O » You are here: 1794-AENT
1794-AENT
Rockwell Disclaimer: The product is used surplus. PDF Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because PDF Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, PDF Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. PDF Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. PDF Supply also makes no representations as to your right to install any such firmware on the product. PDF Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
PDF Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with PDF Supply's 1-year, 2-year, or 3-year warranty.
Other Available Revisions for the 1794-AENT 1794-AENT//A1794-AENT//B
Common misspellings:
- l794-AENT
- 179A-AENT
- 1794AENT
Technical Specifications for 1794-AENT
| Brand | Allen-Bradley / Rockwell Automation |
|---|---|
| Series | Flex I/O |
| Part number | 1794-AENT |
| Product type | EtherNet adapter |
| EtherNet interfaces | 1 |
| Input voltage | 24 Volts DC |
| Maximum input current | 550 milliamps |
| Power dissipation | 7.3 Watts |
| Operating temperature | 0 to 55 degrees Celsius |
| Relative humidity | 5 to 95% |
| Dimensions | 3.4 x 3.7 x 2.7 inches |
| Weight | 180 grams |
| Mounting | DIN rail |
About 1794-AENT
The 1794-AENT adapter is an Allen-Bradley Flex I/O Ethernet adapter. Allen-Bradley also manufacturers a dual port Ethernet adapter (catalog number 1794-AENTR) and an Ethernet adapter which can operate in extreme temperatures (catalog number 1794-AENTRXT). The 1794-AENT adapter supports a 10/100 Mbps data rate. The input voltage range for the module is 19.2 to 31.2 Volts DC and the rated nominal input voltage is 24 Volts DC. The maximum current drawn by the 1794-AENT adapter is 550 milliamps and the typical current draw is 440 milliamps at 24 Volts DC. The inrush current for the 1794-AENT adapter is 23 Amps for 2 milliseconds duration. The maximum FlexBus output current is 640 milliamps. At 19.2 Volts DC, the maximum power dissipated by the 1794-AENT adapter is 7.3 Watts and the thermal dissipation is 24.9 BTU per hour, respectively.
The approximate dimensions of the 1794-AENT adapter are 3.4 x 3.7 x 2.7 inches and the approximate adapter weight is 180 grams. The adapter mounts on a DIN rail and it has an IP 20 protection rating. The adapter is hazardous location approved. Only a soft anti-static cloth should be used to clean the adapter. Cleaning agents should not be used on the 1794-AENT adapter. Because the adapter is sensitive to ESD, Allen-Bradley recommends wearing a grounded wrist strap while handling the adapter and avoiding touching any of the adapter components. The adapter should only be installed or removed when the power is disconnected. The operating and non-operating temperature ranges for the adapter are 0 to 55 degrees Celsius and -40 to 185 degrees Celsius, respectively.
The Allen-Bradley 1794-AENT module is an Ethernet communication adapter. The adapter supports 10/100 Mbps data rates.
F.A.Q for 1794-AENT
