GE / IP FANUC Series 90/30 In Stock
Home » Allen Bradley » Flex I/O » You are here: 1794-ACN15
1794-ACN15
Rockwell Disclaimer: The product is used surplus. PDF Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because PDF Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, PDF Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. PDF Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. PDF Supply also makes no representations as to your right to install any such firmware on the product. PDF Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
PDF Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with PDF Supply's 1-year, 2-year, or 3-year warranty.
Product Description
The Allen-Bradley 1794-ACN15 module is a communication adapter with a single ControlNet communication interface. Allen-Bradley recommends use of the Belden RG-6/U cable for ControlNet communication.
Other Available Revisions for the 1794-ACN15 1794-ACN15//A1794-ACN15//B1794-ACN15//C1794-ACN15//D
Common misspellings:
- l794-ACN15
- 179A-ACN15
- 1794-ACNl5
- 1794ACN15
Technical Specifications for 1794-ACN15
| Brand | Allen-Bradley / Rockwell Automation |
|---|---|
| Series | Flex I/O |
| Part number | 1794-ACN15 |
| Product type | ControlNet adapter |
| ControlNet interfaces | 1 |
| Input voltage | 24 Volts DC |
| Maximum input current | 400 milliamps |
| Power dissipation | 3.4 Watts |
| Operating temperature | -13 to 131 degrees Fahrenheit |
| Storage temperature | -40 to 185 degrees Fahrenheit |
| Relative humidity | 5 to 95% |
| Dimensions | 2.44 x 3.7 x 3.6 inches |
| Mounting | DIN rail |
About 1794-ACN15
The 1794-ACN15 module from Allen-Bradley is a ControlNet single communication module. The 1794 I/O series module can sustain an inrush current of 14 Amps for 2 milliseconds duration. The I/O capacity of the 1794-ACN15 module is 8 modules. The input supply current rating is 400 milliamps and the input voltage range supported by the module is 19.2 to 31.2 Volts DC. The module output ratings are 640 milliamps and 5 Volts DC. The isolation rating of the 1794-ACN15 module is 50 Volts continuous and the module has been tested at 860 Volts AC for up to 60 seconds for the power to system, ControlNet to system, and the power to ControlNet. No isolation is available on the module between the ControlNet channels. The communication rate supported by the 1794-ACN15 module is 5 Mbps.
The maximum power dissipation of the 1794-ACN15 module is 3.4 Watts at 19.2 Volts DC. The recommended terminal screw torque is 0.8 N-m. For power connections, Allen-Bradley recommends 22 to 12 AWG solid or stranded copper wire for single wire connections and 22 to 16 AWG solid or stranded copper wire for double wire connections. Wire that is Category 3 wire should be used on power ports and Category 2 wire should be used on communication ports. The enclosure of the 1794-ACN15 module is open and it measures 2.44 x 3.7 x 3.6 inches. The approximate weight of the module is 220 grams. The recommended ControlNet cable is the Belden RG-6/U cable. The operating and non-operating temperature ranges recommended by Allen-Bradley are -13 to 131 degrees Fahrenheit and -40 to 185 degrees Fahrenheit, respectively.
The Allen-Bradley 1794-ACN15 module is a communication adapter with a single ControlNet communication interface. Allen-Bradley recommends use of the Belden RG-6/U cable for ControlNet communication.
F.A.Q for 1794-ACN15
