Allen Bradley | Flex I/O

The Allen-Bradley 1794-ACN adapter is a ControlNet adapter. The data rate supported by the adapter is 5 Mbps.

The Allen-Bradley 1794-ACN15 module is a communication adapter with a single ControlNet communication interface. Allen-Bradley recommends use of the Belden RG-6/U cable for ControlNet communication.

The 1794-ACNR adapter is a Flex I/O redundant ControlNet adapter from Allen-Bradley. There are 2 ControlNet BNC interfaces on the adapter which are each capable of a 5 Mbps transmission rate.

The 1794-ACNR15 adapter is a communication adapter which supports redundant ControlNet network communications. The 1794-ACNR15 adapter requires 24 Volts DC input for operation.

The 1794-ACNR15K adapter is a 1794 Flex I/O communications adapter from Allen-Bradley. The 1794-ACNR15K adapter supports redundant ControlNet communication.

The 1794-ACNR15XT adapter is an extended temperature ControlNet adapter. It belongs to the 1794 Flex I/O series from Allen-Bradley.

The 1794-ADN adapter is an Allen-Bradley 1794 Flex I/O DeviceNet adapter. The adapter measures 87 x 68 x 69 millimeters and it weighs 195.5 grams.

The Allen-Bradley 1794-AENT module is an Ethernet communication adapter. The adapter supports 10/100 Mbps data rates.

The 1794-AENTR module is an Allen-Bradley/Rockwell Automation component used for FLEX I/O systems. The module has a voltage rating of 24 Volts DC and it supports a maximum of 8 terminal bases. The module communicates through the EtherNet/IP network and it mounts on a DIN rail. The module operates in half/full duplex mode with a speed of 10 megabits or 100 megabits.

The 1794-AENTRXT dual port EtherNet/IP adapter module by Allen-Bradley/Rockwell Automation is part of the FLEX I/O series and it has a communication rate of 10/100 megabits per second. The module has an input voltage of 24 Volts DC and an isolation voltage of 50 Volts continuous. The module dissipates power at a rate of 6.1 Watts and it uses a DIN rail for mounting.

The PROFIBUS adapter module with the product code 1794-APB has a communication rate of up to 12 megabits per second and an I/O capacity of 8 I/O modules. The module is manufactured by Allen-Bradley/Rockwell Automation and it is designed for 24 Volts DC input voltage. The module dissipates 7.68 Watts of power and it has a thermal dissipation rating of 26 BTU per hour. The unit has an open type of enclosure and a Flexbus output current of 640 milliamps at 5 Volts DC.

The 1794-APBDPV1 communication adapter is a PROFIBUS component designed by Allen-Bradley/Rockwell Automation and intended for the FLEX I/O systems. The adapter has an input current of 385 milliAmps and an input voltage of 24 Volts DC. The inrush current of the adapter is 23 Amps for 2 milliseconds and its output current for Flexbus is 640 milliAmps at 5 Volts DC. The I/O capacity of the adapter is 8 I/O modules.

The 1794-ASB adapter module communicates with analog modules from the FLEX Integra series and FLEX modules with 32 I/O points. The 1794-ASB remote I/O adapter module by Allen-Bradley/Rockwell Automation has a voltage rating of 24 Volts DC and it features communication rates from 57.6 to 230.4 kilobits per second. The product has an 8-module capacity and it includes indicators for the power, active state, and faults in the module. 

The remote I/O adapter module with the catalog number 1794-ASB2 is a FLEX I/O component with an input voltage of 24 Volts DC. This Allen-Bradley/Rockwell Automation module has an output current of 640 milliAmps and current draw of 330 to 450 milliAmps. The module communicates at rates of 57.6, 115.2, or 230.4 kilobits per second.

The 1794-ASBLT FLEX I/O communication adapter is made for remote I/O communication and it has an I/O capacity of 8 modules. The module has an output current of 640 milliAmps and 57.6 kilobits per second of communication rate. The unit is designed by Allen-Bradley/Rockwell Automation and it has the following dimensions (HxWxD): 87 x 68 x 69 millimeters (3.4 x 2.7 x 2.7 inches).

The 1794-AV-MVI communication module is made by Allen-Bradley/Rockwell Automation and it is introduced through Series A of the FLEX I/O series. The module features communication rates of up to 230.4 kilobits per second. The specified input voltage of the module is 24 Volts DC and it has an I/O hosting capacity of 8 modules.

The Allen-Bradley 1794-FLA extended-local I/O adapter has a nominal input voltage of 24 Volts DC and an input voltage range of 19.2 to 31.2 Volts DC. The adapter has a backplane current output rating of 653 milliAmps (maximum) at 5.1 Volts DC and a thermal dissipation rating of 25.6 BTU per hour.

The 1794-IA16 module is an AC digital input module designed for FLEX I/O systems. The module is produced by Allen-Bradley/Rockwell Automation and it connects to an external power source with an input voltage of 120 Volts AC. 

The Allen-Bradley Flex I/O 1794-IA8 module comes with 8 non-isolated inputs. It operates on AC voltage and it can be installed on a variety of different Allen-Bradley terminal bases.

The Allen-Bradley 1794-IA8I module is a digital I/O module. It has 8 isolated input channels.

The 1794-IA8K input module is an Allen-Bradley-manufactured I/O module. It has a voltage rating of 85 to 125 Volts AC.

The Allen-Bradley 1794-IB16 input module is a 16-point input module with current sinking inputs. It operates with DC power in a temperature range from -4 to 131 degrees Fahrenheit.

The 1794-IB16D module is an I/O diagnostics module by Allen-Bradley. The module has a compact footprint that makes flexible and easy to install.

The 1794-IB16XOB16P module is a combination module from the Flex I/O series. It has been manufactured by Allen-Bradley.

The 1794-IB32 module is an I/O module made by Allen-Bradley. It has a nominal voltage rating of 24 Volts DC.

The 1794-IB8 module is an I/O module with 8 digital inputs. It has been designed for industrial applications.

The 1794-IB8S module is an Allen-Bradley sensor input module. This input module has 8 input channels and it uses DC power.

The Allen-Bradley 1794-IC16 input module is a 16-point Flex I/O series module. It is a DC input module that has an adjustable filter time and that can be installed on a variety of different terminal bases.

The 1794-ID2 encoder is an Allen-Bradley Flex I/O incremental encoder. It is used for scaling operations in the industrial sector.

The 1794-IE12 module is a Flex I/O high-density I/O module. It has been manufactured by Allen-Bradley with 12 inputs.

The 1794-IE4XOE2 module is an Allen-Bradley Flex I/O high-density input module. It can be used like a rack-based I/O system.

The Allen-Bradley 1794-IE4XOE2XT module is an analog combination module with 4 inputs and 2 outputs. It is part of the Allen-Bradley Flex I/O module series.

The Allen-Bradley 1794-IE8 input module is a high-density Flex I/O series input module. It operates with 24 Volts DC nominal input voltage from an external source and its operating DC voltage range is 19.2 to 31.2 Volts DC.

The Allen-Bradley 1794-IE8H Hart input module is a Flex I/O series module with 8 inputs. Its inputs support current in the range of 0 to 20 milliamps or 4 to 20 milliamps.

The Allen-Bradley 1794-IE8K input module comes with 8 inputs and it is suitable for European and North American hazardous environments if it has the proper enclosure. It is part of the Allen-Bradley Flex I/O series of industrial I/O devices.

The Allen-Bradley/Rockwell Automation 1794-IE8XOE4 Flex I/O analog input module comes with 8 single-ended and non-isolated inputs and it works as a block transfer module.

The Allen-Bradley 1794-IE8XT high-density input module is part of the Flex I/O series. It operates with a nominal voltage of 24 Volts DC and it has 1 green indicator.

The 1794-IF2XOF2I I/O module is an Allen-Bradley Flex I/O series combination module that features 2 inputs and 2 outputs. This analog combination module can handle a variety of block transfer applications with different compatible Allen-Bradley controllers.

The Allen-Bradley/Rockwell Automation Flex I/O 1794-IF2XOF2IXT module is an industrial input module that can operate in hazardous environments. It can communicate with several different industrial controllers and I/O modules and it can mount on several different terminal base units. Its analog inputs are all isolated.

The 1794-IF4I input module is manufactured by Allen-Bradley/Rockwell Automation as an analog input module with 4 isolated input points. It is made to exchange data through block transfers with compatible Allen-Bradley industrial controllers.

The Allen-Bradley/Rockwell Automation 1794-IF4ICFXT module is an isolated analog input module. It operates with a voltage of 24 Volts DC and it has a unipolar resolution of 16 bits.

The Allen-Bradley 1794-IF4IXT FLEX I/O module is an industrial isolated analog input module. It is rated for safe operation in hazardous locations.

The Allen-Bradley/Rockwell Automation 1794-IF8IH FLEX I/O input highway addressable remote transducer module has 8 inputs and 2 current ranges that go from 4 to 20 milliamps and 0 to 20 milliamps. It is part of the FLEX I/O series.

The Allen-Bradley 1794-IF8IHNFXT input module is a Flex I/O HART input module that supports HART modems with each of its channels. It is an analog input module that supports the ControlNet and Ethernet/IP networks.

The 1794-IH16 digital input module is a Flex I/O series Allen-Bradley input module that features 16 inputs. It operates with DC power and it has 125 Volts DC of nominal voltage.

The Allen-Bradley 1794-IJ2 module is a Flex I/O series frequency input module that can work with high-speed frequency algorithms.

The 1794-IJ2K frequency input module from Allen-Bradley can handle high-speed frequency algorithms and 32,767 Hertz of maximum frequency. It can handle binary data and its processing time is under 4 milliseconds.

The Allen-Bradley 1794-IJ2XT FLEX I/O input module is an input frequency module. It comes with 2 inputs that operate at a frequency of 1 to 32 kilohertz.

The Allen-Bradley/Rockwell Automation 1794-IM8 AC digital input module comes with 8 non-isolated inputs. It operates with a voltage rating of 264 Volts AC.

The Allen-Bradley 1794-IP4 pulse counter module comes with 4 inputs that are arranged in 2 groups of 2 inputs each. This module is a channel pulse counter module.

The Allen-Bradley/Rockwell Automation 1794-IR8 RTD module is an industrial module. It is meant to be installed on a terminal base and it comes with 8 inputs and 1 status indicator.

The Allen-Bradley 1794-IRT8 thermocouple/RTD analog input module is an industrial thermocouple and RTD module. It comes with 8 inputs and it requires an external power supply rated at 24 Volts DC.

The Allen-Bradley 1794-IRT8K FLEX I/O Thermocouple/RTD Input Analog Module is an intelligent analog input module from the Flex I/O system designed to interface analog signals with the Allen-Bradley programmable logic controllers through the FLEX I/O bus. This module provides 8 non-isolated thermocouple or RTD inputs that accept millivolt or resistive inputs.

The Allen-Bradley 1794-IRT8XT FLEX I/O Thermocouple/RTD Input Analog Module is an intelligent analog input module from the Flex I/O system designed to interface analog signals with the Allen-Bradley/Rockwell Automation programmable logic controllers through the FLEX I/O Bus. This module provides 8 non-isolated thermocouple or RTD inputs that accept millivolt inputs or resistive inputs.

The 1794-IT8 Thermocouple/Millivolt Input Module is an analog thermocouple input module from the Allen-Bradley Flex I/O system. This module provides 8 individually-isolated input channels that accept thermocouple/millivolt inputs, and it supports the B, C, E, J, K, N, R, S, T, and L types of thermocouples.

The Allen-Bradley 1794-IV32 Flex I/O Digital Sourcing Input Module is a 32-point digital input module from the Flex I/O system. This module provides 2 non-isolated sourcing inputs with 24 Volts DC nominal voltage and 500 milliamps of maximum input current rating.

The 1794-L33 controller is manufactured by Allen-Bradley/Rockwell Automation as a FlexLogix controller that has 64 KB of user memory. Its nominal input voltage rating is 24 Volts DC and the maximum current rating at this voltage is 0.85 Amps.

The Allen-Bradley 1794-L34 controller is part of the Flex I/O and FlexLogix series. It provides 512 KB of memory to a FlexLogix industrial system and it operates with DC power.

The Allen-Bradley 1794-OA16 output module is part of the Flex I/O module series and it features 16 outputs. It is designed to be small and light with dimensions of 3.7 x 3.7 x 2.7 inches and a weight of 3.38 ounces.

The Allen-Bradley 1794-OA8 AC output module is a member of the Flex I/O series of industrial input and output modules. Its nominal voltage rating is 120 Volts AC and its operating voltage range is from 85 to 132 Volts AC.

The Allen-Bradley 1794-OA8I output module is part of the Flex I/O series that runs on AC power and that can operate in hazardous locations. It operates with a voltage range from 85 to 132 Volts AC.

The Allen-Bradley 1794-OA8K Flex I/O Conformally Coated Digital Output Module is an 8-channel digital output module from the in-cabinet Flex I/O distributive system. This module provides 8 non-isolated outputs with an 85 to 132 Volts AC output voltage range, 0.5 Amps maximum load per channel, and 4.0 Amps maximum load per module.

The 1794-OB16 Flex I/O Digital Output Module is a 16-point current sourcing output module for the Allen-Bradley Flex I/O in-cabinet modular system. This module provides 16 non-isolated sourcing outputs with 24 Volts DC nominal voltage ratings and 500 milliamps current ratings per channel.

The Allen Bradley 1794-OB16D Flex I/O Digital Output Module is a 16-channel output module with diagnostic capability designed for the Flex I/O system. This module provides 16 non-isolated sourcing outputs with 24 Volt DC nominal voltage rating and 500 mill-Amps current rating per channel.

The Allen-Bradley 1794-OB16P Flex I/O Digital Output Module is a 16-channel output module with protected outputs. This module provides 16 non-isolated sourcing outputs with a 24 Volts DC nominal voltage rating and 500 milliamps current rating per channel.

The Allen-Bradley 1794-OB32P Flex I/O Digital Output Module is a 32-channel output module with protected outputs designed for the Flex I/O system. This module provides 32 non-isolated sourcing outputs with a 24 Volts DC nominal voltage rating and a 500 milliamps current rating per channel.

 

The Allen-Bradley 1794-OB8 Flex I/O Digital Output Module is a 32-channel output module designed for the Flex I/O system. This module provides 8 non-isolated sourcing outputs with 24 Volts DC nominal voltage ratings, and 500 milliamps of current rating per channel.

The Allen-Bradley 1794-OB8EP module is an 8-point output module from the Flex I/O series. It operates with DC voltage.

The Allen-Bradley 1794-OC16 module is an output module. It belongs to the 1794 Flex I/O device family and it has 16 sourcing outputs. 

The 1794-OE12 module is an Allen-Bradley Flex I/O module. A total of 12 analog output channels are available on the 1794-OE12 module. 

The Allen Bradley 1794-OE4 module is an Flex I/O module. Four non-isolated output channels are available on the module for communication. 

The 1794-OE4K module is a Flex I/O module from Allen-Bradley. The module comes with a conformal coating which makes it suitable for use in hazardous environments. 

The 1794-OE8H module is an output HART analog module. It belongs to Flex I/O family from Allen-Bradley.

The 1794-OF4I module is an output module. The 1794-OF4I module provides 4 isolated outputs and it is part of the Flex I/O series of modules from Allen-Bradley. 

The 1794-OF4IXT module is an Allen-Bradley isolated output module. A total of 4 isolated output channels are available on the module.

The Allen-Bradley 1794-OF8IH module is a HART isolated analog module. Allen-Bradley recommends use of the module only with ATEX-rated backplanes. 

The Allen-Bradley 1794-OM8 Distributed I/O Digital Module is manufactured as part of the Flex I/O 1794 series. It features 8-non-isolated outputs and it runs on 220 Volts AC output voltage.

The Allen-Bradley 1794-OV16 Output Module is a digital sink output module with 16 sink outputs. Allen-Bradley/Rockwell Automation manufactures it as part of the Flex I/O 1794 product line.

Allen-Bradley manufactures the 1794-OV16P Module as a protected sink output module with 16 sinking outputs and a nominal on-state voltage of 24 Volts DC. It has a current rating of 8.0 Amps and it operates with an on-state current of 500 milliamps per channel maximum and a 0.5 milliamps per channel minimum.

The Allen-Bradley 1794-OV32 Digital DC Output Module is manufactured as a Flex I/O 1794 product. It has a 24 Volts DC voltage rating with a current rating of 500 milliamps.

The 1794-OW8 Module is a Flex I/O relay output module with 8 relay outputs. It has an off-state leakage current of 1.0 milliamp through a Snubber Circuit and a minimum contact load of 100...

The Allen-Bradley 1794-OW8K relay output module features 8 relay outputs with an off-state leakage current of 1.0 milliamp through a snubber circuit. It runs with a bounce time of 1.2 milliseconds.

The 1794-OW8XT module is a relay output module manufactured by Allen-Bradley/Rockwell Automation. It has 8 isolated normally-open relay contacts, with a voltage rating of 230 Volts AC and 120 Volts DC and an extended operating temperature range.

The 1794-PS1 module is a power supply module and an adapter module manufactured by Allen-Bradley in the Flex I/O series. It can supply power to as many as 8 I/O modules at a time.

The Allen-Bradley 1794-PS13 power supply module is part of the Allen-Bradley Flex I/O series and it runs on DC power. This module can supply power to several I/O modules through as many as 4 adapter modules that can adapt DC voltage into AC voltage.

Allen-Bradley manufactures the 1794-PS3 power supply module as a Flex I/O 1794 series power supply. It comes with different output current ratings, including 1.3 Amps and 3 Amps.

The 1794-TB2 terminal base from Allen-Bradley is a cage clamp terminal base for the Flex I/O modules. This terminal base hosts most of the wiring for the Flex I/O system and this makes it easy to replace the I/O module.

The Allen-Bradley 1794-TB3 Terminal Base Unit features cage-clamp and 3-wire screw terminations and wiring connections that include 16 inputs, 18 commons, and 18 Volts connections. It is used in applications with ratings of up to 132 Volts AC, 156 Volts DC, and 10 Amps. 

The Allen-Bradley 1794-TB32 Terminal Base is a Flex I/O terminal base unit. It is a 32-channel terminal base unit with 3-wire screw and cage clamp terminations.

Allen-Bradley manufactures the 1794-TB32S Terminal Base as a terminal base unit for the Flex I/O 1794 series with a spring clamp termination. It has a Flexbus current of 640 milliamps at 5 Volts DC and A maximum I/O terminal current rating of 2 Amps.

The Allen-Bradley 1794-TB3G Flex I/O Terminal Base Unit has a terminal screw torque of 0.56 to 0.79 N-m. It also comes with a supply voltage of 31.2 Volts DC/AC, a frequency of 50/60 Hertz, and current of 10 Amps.

The Allen-Bradley 1794-TB3GS Terminal Base Unit is a Flex I/O terminal base unit with 0.56 to 0.79 N-m of terminal screw torque. It features a supply voltage of 31.2 Volts AC/DC, at 50/60 Hertz and 10 Amps and it has a maximum isolation voltage of 50 Volts continuous.

The Allen-Bradley 1794-TB3S Terminal Base Unit is part of the Flex I/O 1794 series with 0.56 to 0.79 N-m terminal screw torque. This unit has a maximum supply voltage of 125 Volts DC/AC, at 50/60 Hertz and 10 Amps, and a 125 Volts of continuous isolation voltage.

The Allen-Bradley 1794-TB3T Terminal Base Unit comes with a terminal screw torque of 0.56 to 0.79 N-m. It has a supply voltage rating of 125 Volts AC/DC at 50/60 Hertz frequency and a current rating of 10 Amps. 

The Allen-Bradley 1794-TB3TS Flex I/O 1794 Terminal Base Unit has a supply voltage of 125 Volts AC/DC and 0.56 to 0.79 N-m of terminal screw torque. This unit has a frequency of 50/60 Hertz, a current rating of 10 Amps, and an isolation voltage of 125 Volts (continuous).

The Allen-Bradley 1794-TBN Terminal Base Unit is manufactured as a Flex I/O 1794 series product with 0.4 N-m of terminal screw torque. It has 250 Volts AC/DC supply voltage at 50/60 Hertz frequency and a current rating of 10 Amps. It operates at a continuous isolation voltage of 250 Volts maximum.

The 1794-TBNF Terminal Base is a Flex I/O terminal base unit which has a terminal screw torque of 1.4 N-m, and a supply voltage of 250 Volts AC/DC, at 50 to 60 Hertz, 10 Amps . It has a 250 Volts continuous isolation voltage at maximum and uses the 0.34 to 3.3 square millimeters wire. Its approximate dimensions are 94 x 94 x 69 millimeters.

The Allen-Bradley 1794-VHSC High-Speed Counter Module features 2 input channels. It has 5 Volts DC of rated input voltage and operates with an on-state current of 5 milliamps.

The Allen-Bradley 1794IEXOE2 PLC Module is manufactured as a Flex I/O 1794 product. It has 2 single-ended outputs and 4 inputs, with an input conversion rate of 256 us.  

The Allen-Bradley 1794sc-IF8IU input module is a Flex I/O module with 8 input channels. It can handle data in multiple formats including engineering units and data that has been scaled for PID.

The Allen-Bradley 1794sc-IRT8I input module is a Flex I/O module with 8 channels that support 22 types of inputs and that can operate easily in noisy industrial environments. It operates with DC voltage.

The 3170-MBS Modbus slave adapter from Allen-Bradley/Rockwell Automation is made to give a Modbus master adapter access to 8 Flex I/O series modules, 8 Integra series modules, or a combination of 8 Flex I/O and Integra series modules. Its nominal input voltage rating is 24 Volts DC.

The Allen-Bradley 3170-PDP Profibus adapter interfaces between the Flex I/O backplane and Profibus scanners and controllers. It is part of the Allen-Bradley Flex I/O series and it can interface with up to 8 modules.

The MVI94-ADM Modbus module can be used as a master communication module or as a slave communication module in different applications. It is manufactured by Allen-Bradley and it operates with DC power.

The Flex I/O MVI94-DNP communication module from Allen-Bradley is a DC-powered module. It can be configured with the 3 jumpers that come installed on it.

The ProSoft Technology MVI94-GSC-E communication module is a generic communication module from the Flex I/O series. It supports the GSC-E protocol which controls its ports.

The MVI94-MCM module is a serial communication module manufactured by GE Fanuc/ProSoft Technology. This communication module is part of the Flex I/O series.

The GE Fanuc and ProSoft Technology MVI94-MCM-MHI interface module is a Modbus network interface module from the Flex I/O series. It has a special application port that can handle Modbus master functions and Modbus slave functions.