GE / IP FANUC Series 90/30 In Stock
Home » Allen Bradley » Flex 5000 » You are here: 5094-STB-QTY5
5094-STB-QTY5
Rockwell Disclaimer: The product is used surplus. PDF Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because PDF Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, PDF Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. PDF Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. PDF Supply also makes no representations as to your right to install any such firmware on the product. PDF Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
PDF Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with PDF Supply's 1-year, 2-year, or 3-year warranty.
Other Available Revisions for the 5094-STB-QTY5 5094-STB-QTY5//A
Common misspellings:
- 5o94-STB-QTY5
- 509A-STB-QTY5
- 5094-ST8-QTY5
- 5094STBQTY5
Technical Specifications for 5094-STB-QTY5
| Brand | Allen-Bradley / Rockwell Automation |
|---|---|
| Series | Flex 5000 |
| Part number | 5094-STB-QTY5 |
| Product type | Spare parts kit |
| Kit type | Shield bar spare parts kit |
| Number of bars per kit | 5 |
| Shield bar type | Screw-type shield bars |
| Maximum current | 10 Amps |
| Maximum voltage | 300 Volts AC |
| Maximum torque | 3.5 pounds on an inch |
About 5094-STB-QTY5
The Allen-Bradley/Rockwell Automation 5094-STB-QTY5 kit is a spare parts kit for the Allen-Bradley FLEX 5000 series devices that contains 5 shield bars and a small instruction sheet. The 5 shield bars in the 5094-STB-QTY5 shield bar kit are all screw-type shield bars and the instruction sheet tells the FLEX 5000 device users the specifications of the shield bars and how to use them properly with different devices. Shield bars are used by terminal base assemblies from the Allen-Bradley FLEX 5000 series that are acting as the terminal bases for FLEX 5000 series analog output modules, analog input modules, and high-speed counter modules.
Each shield bar in the Allen-Bradley/Rockwell Automation 5094-STB-QTY5 shield bar spare parts kit weighs about 1.97 ounces (56 grams) and the dimensions of a single shield bar are about 1.3 x 3.7 x 0.9 inches (33 x 94 x 24 millimeters). These shield bars can handle torque levels of up to 3.5 pounds on an inch or 0.4 N-m. Their maximum current rating is 10 Amps while their maximum voltage rating is 300 Volts AC. The maximum input and output rating for the shield bars found in the 5094-STB-QTY5 spare parts kit is 2 Amps at 32 Volts DC. The purpose of the shield bars from this kit is to wire the shields for the analog I/O and high-speed counter modules as well as the terminal bases that these modules are installed in. They provide additional protection to the modules and terminal bases and to the operators who use them. Screw type shield bars from the 5094-STB-QTY5 kit provide 16 extra screw terminals to a module for expansion.
The Allen-Bradley 5094-STB-QTY5 shield bar kit comes with 5 screw-type shield bars that are made for the Allen-Bradley FLEX 5000 modules and terminal bases. The input and output rating for these bars is 2 Amps of current at 32 Volts DC voltage maximum.
F.A.Q for 5094-STB-QTY5
