GE / IP FANUC Series 90/30 In Stock
Home » Allen Bradley » Flex 5000 » You are here: 5094-RTB3XT
5094-RTB3XT
Rockwell Disclaimer: The product is used surplus. PDF Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because PDF Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, PDF Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. PDF Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. PDF Supply also makes no representations as to your right to install any such firmware on the product. PDF Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
PDF Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with PDF Supply's 1-year, 2-year, or 3-year warranty.
Other Available Revisions for the 5094-RTB3XT 5094-RTB3XT//A
Common misspellings:
- 5o94-RTB3XT
- 509A-RTB3XT
- 5094-RT83XT
- 5094RTB3XT
Technical Specifications for 5094-RTB3XT
| Brand | Allen-Bradley / Rockwell Automation |
|---|---|
| Series | Flex 5000 |
| Part number | 5094-RTB3XT |
| Description | Removable terminal block |
| Voltage | 24 Volts DC |
| Cable size | 22-14 AWG |
| TB torque | 0.4 N-m |
| Temperature | -40-70 degrees Celsius |
| Isolation voltage | 250 Volts |
| Standards | cULus, CE, RCM |
| SA Power | 10 Amps |
About 5094-RTB3XT
The 5094-RTB3XT block is a screw based removable terminal block by Allen-Bradley. It is part of the Flex 5000 series of I/O modules. The terminal base of the I/O houses the relay terminal block. The Flex 5000 I/O architecture can work with a wide range of input and output modules and it can support different application demands. The removable terminal block is mounted on a zinc-plated DIN rail with rail-end anchors to withstand shocks and vibrations. The 5094-RTB3XT removable terminal block comes with TB torque of 0.4 N-m. It has a maximum output rating of 2 Amps of current with 125 Volts DC voltage. The RTB is supplied with a 24 Volts DC power supply. The block has a peak SA power rating of 10 Amps with voltage range of 18 to 32 Volts DC.
The 5094-RTB3XT removable terminal block uses 22 to 14 AWG copper wire for wiring and connections. The operating temperature for both hot and cold environments should be set between -40 and 70 degrees Celsius. The non-operating temperature is between -40 and 85 degrees Celsius. The terminal block has been certified with the cULus, CE, RCM, and other industrial standards. The front side of the removable terminal block has the shield bar along with the input/output terminal strips. These strips are used for connecting the input/output wiring, commons, power connections, and customer power supplies. The 5094-RTB3XT removable terminal block has an isolation voltage rating of 250 Volts AC. The removable terminal block is installed on the bottom of the terminal base and it comes with an open enclosure. The terminal base is used to connect the field side wiring.
The 5094-RTB3XT block is a removable terminal block by Allen-Bradley. It is powered with a 24 Volts DC power supply.
F.A.Q for 5094-RTB3XT
