GE / IP FANUC Series 90/30 In Stock
Home » Allen Bradley » Flex 5000 » You are here: 5094-RTB3WXT
5094-RTB3WXT
Rockwell Disclaimer: The product is used surplus. PDF Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because PDF Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, PDF Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. PDF Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. PDF Supply also makes no representations as to your right to install any such firmware on the product. PDF Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
PDF Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with PDF Supply's 1-year, 2-year, or 3-year warranty.
Other Available Revisions for the 5094-RTB3WXT 5094-RTB3WXT//A
Common misspellings:
- 5o94-RTB3WXT
- 509A-RTB3WXT
- 5094-RT83WXT
- 5094RTB3WXT
Technical Specifications for 5094-RTB3WXT
| Brand | Allen-Bradley / Rockwell Automation |
|---|---|
| Series | Flex 5000 |
| Part number | 5094-RTB3WXT |
| Description | Removable Terminal block |
| Series | Flex 5000 |
| Current output | 2 Amps |
| Voltage | 125/240 Volts AC |
| Frequency | 50/60 Hertz |
| Isolation voltage | 250 Volts |
| Insulation | 1.2 millimeters |
| Temperature | -40-70 degrees Celsius |
About 5094-RTB3WXT
The 5094-RTB3WXT terminal block is a Flex 5000 series removable terminal block manufactured by Allen-Bradley. This block is part of the terminal base assembly of the Flex 5000 I/O module. The terminal block comes with an output rating of 2 Amps and 125/240 Volts AC at a frequency of 50/60 Hertz. The SA (Sensor Actuator) power rating of the block is 10 Amps with a voltage range of 18 to 32 Volts DC. An isolation voltage of 250 Volts is present from channel to chassis, channel to SA, and from SA to chassis. Both basic and reinforced insulation types are present. The 5094-RTB3WXT removable terminal block uses 22-14 AWG copper cable that is solid or stranded. These cables are rated at 105 degrees Celsius or greater, with 1.2 millimeters of insulation. The terminal block is compact in size with dimensions of 2.08 inches in height, 3.70 inches in width, and 3 inches in depth. It weighs around 202 grams.
The Allen-Bradley 5094-RTB3WXT removable terminal block supports a wide range of I/O modules and it helps with different application demands. The terminal block is compatible with the CompactLogix and ControlLogix controllers. The 5094-RTB3WXT removable terminal block has an open enclosure and it should always be used inside of a cabinet or panel space. The operating temperature range should be set between -40 and 70 degrees Celsius and the device can be stored at a temperature between -40 and 85 degrees Celsius. The terminal block is able to withstand 5 G vibrations, and shocks of 30 G.
The 5094-RTB3WXT block is an Allen-Bradley removable terminal block. It has a current output of 2 Amps.
F.A.Q for 5094-RTB3WXT
