GE / IP FANUC Series 90/30 In Stock
Home » Allen Bradley » Flex 5000 » You are here: 5094-RTB3WS
5094-RTB3WS
Rockwell Disclaimer: The product is used surplus. PDF Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because PDF Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, PDF Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. PDF Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. PDF Supply also makes no representations as to your right to install any such firmware on the product. PDF Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
PDF Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with PDF Supply's 1-year, 2-year, or 3-year warranty.
Other Available Revisions for the 5094-RTB3WS 5094-RTB3WS//A
Common misspellings:
- 5o94-RTB3WS
- 509A-RTB3WS
- 5094-RT83WS
- 5094RTB3WS
Technical Specifications for 5094-RTB3WS
| Brand | Allen-Bradley / Rockwell Automation |
|---|---|
| Series | Flex 5000 |
| Part Number | 5094-RTB3WS |
| Product Type | Removable Terminal Block |
| Product Line | Flex 5000 |
| Enclosure | Open Style |
| Temperature Code | T4 ATEX |
| Dimensions | 53 x 94 x 76 mm |
| Weight | 202 grams |
| Wire Size | 22 to 14 AWG |
| Wire Type | Solid/Stranded Copper |
| Output Rating | 2A at 240V AC, 2A at 125V DC |
| SA Power | 10A at 18 to 32VDC |
| Operating Temperature | -40 and 70 degrees Celsius |
| Mounting Bases | 5094-MB/50940MBXT |
About 5094-RTB3WS
The 5094-RTB3WS block is a removable terminal block manufactured by Allen-Bradley as part of the FLEX 5000 series. This terminal block is removable and it features an open-style enclosure with a T4 ATEX temperature code. It comes with approximate dimensions of 53 x 94 x 76 millimeters as well as a shipping weight of about 202 grams. It features a continuous isolation voltage of 250 Volts AC, and it uses copper wire as the recommended wire for its terminations. The wire size used with the 5094-RTB3WS terminal block is 22 to 14 AWG, which can be stranded or solid wire with a rating of 105 degrees Celsius. This terminal also has output ratings of 2 Amps of current at 240 Volts AC maximum and 2 Amps at 125 Volts DC minimum. It also features a peak sensor actuator power rating of 10 Amps at 18 to 32 Volts DC.
The Allen-Bradley 5094-RTB3WS removable terminal block has key switches that should be set to match the I/O module's settings. The terminal block is part of a terminal base assembly that comprises mounting bases like the 5094-MB or 50940MBXT mounting base. It operates at a temperature ranging between -40 and 70 degrees Celsius. The users of this terminal must take precaution to ensure the block is used only within this temperature range. Cleaning agents should not be used to clean the 5094-RTB3WS terminal block, and when the device requires cleaning, an anti-static cloth that is not wet should be used. One conductor should be connected to the 5094-RTB3WS terminal block. When installing this terminal block, only qualified technicians should handle the device.
The Allen-Bradley 5094-RTB3WS block is a removable terminal block is a member of the FLEX 5000 product line. It features a voltage rating of 18 to 32 Volts DC, and it is used with copper wire with a size of 22 to 14 AWG.
F.A.Q for 5094-RTB3WS
