GE / IP FANUC Series 90/30 In Stock
Home » Allen Bradley » Flex 5000 » You are here: 5094-RTB3W
5094-RTB3W
Rockwell Disclaimer: The product is used surplus. PDF Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because PDF Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, PDF Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. PDF Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. PDF Supply also makes no representations as to your right to install any such firmware on the product. PDF Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
PDF Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with PDF Supply's 1-year, 2-year, or 3-year warranty.
Other Available Revisions for the 5094-RTB3W 5094-RTB3W//A
Common misspellings:
- 5o94-RTB3W
- 509A-RTB3W
- 5094-RT83W
- 5094RTB3W
Technical Specifications for 5094-RTB3W
| Brand | Allen-Bradley / Rockwell Automation |
|---|---|
| Series | Flex 5000 |
| Part Number | 5094-RTB3W |
| Product Type | Removable Terminal Block |
| Product Line | Flex 5000 |
| Application | Logix 5000 controllers |
| Software | Studio 5000 Logix Designer software |
| Mounting | ATEX/IECEx Zone 2 certified enclosure |
| Ingress Protection Rating | IP 54 |
| SA Power | 10A |
| Voltage | 18 to 32V DC |
| Output Rating | 2A at 240V AC, 2A at 125V DC |
| Frequency | 50 to 60 Hz |
| Altitude | 2000 m |
About 5094-RTB3W
The Allen-Bradley 5094-RTB3W terminal block is a removable terminal block or RTB that is manufactured as a member of the FLEX 5000 product family. It makes up part of a terminal base along with a mounting base. Allen-Bradley FLEX 5000 I/O modules require terminal bases for mounting and connecting the wiring. The modules in the Flex 5000 I/O system are compatible with the Logix 5000 controllers. This terminal block comes with a sensor actuator power rating of 10 Amps maximum with a voltage rating of 18 to 32 Volts DC. The output rating of this terminal block is 2 Amps at 240 Volts AC and 2 Amps at 125 Volts DC with a frequency of 50 to 60 Hertz. It also has a maximum operating altitude of 2000 meters above sea level.
The Allen-Bradley 5094-RTB3W Removable Terminal Block operates in a temperature range of -40 to 158 degrees Fahrenheit and it requires more than one conductor for all of the wiring. The terminal block is not resistant to UV radiation sources or to direct sunlight, and it should be mounted in an ATEX/IECEx Zone 2 certified enclosure with an IP 54 ingress protection rating at minimum. No equipment on the 5094-RTB3W RTB should be installed or disconnected with the power switched on. This terminal block is sensitive to ESD and the operators should take static-prevention precautions while handling it. The operators must ensure that the potential static is discharged by touching a grounded object, and they should also wear an approved wrist-strap, and avoid touching the connectors or pins on the boards.
The Allen-Bradley 5094-RTB3W removable terminal block is a Flex 5000 module. It has a SA current rating of 10 Amps, with an IP 54 ingress protection rating.
F.A.Q for 5094-RTB3W
