GE / IP FANUC Series 90/30 In Stock
Home » Allen Bradley » Flex 5000 » You are here: 5094-RTB3T
5094-RTB3T
Rockwell Disclaimer: The product is used surplus. PDF Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because PDF Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, PDF Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. PDF Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. PDF Supply also makes no representations as to your right to install any such firmware on the product. PDF Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
PDF Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with PDF Supply's 1-year, 2-year, or 3-year warranty.
Other Available Revisions for the 5094-RTB3T 5094-RTB3T//A
Common misspellings:
- 5o94-RTB3T
- 509A-RTB3T
- 5094-RT83T
- 5094RTB3T
Technical Specifications for 5094-RTB3T
| Brand | Allen-Bradley / Rockwell Automation |
|---|---|
| Series | Flex 5000 |
| Part Number | 5094-RTB3T |
| Product Type | Removable Terminal Block |
| Product Line | Flex 5000 |
| Application | Flex 5000 I/O System |
| Channel Current | 2 A |
| Voltage | 18 to 32V DC |
| SA Current | 1.8 A |
| Maximum Pass-Through Current | 10 A |
| Nominal Voltage Rating | 18V DC |
| Wire Size | 0.34 x 2.5 mm square |
| Isolation Voltage | 250V AC |
| Weight | 0.5 pounds |
| Dimensions | 2.0 x 3.7 x 3.0 inches |
About 5094-RTB3T
The 5094-RTB3T Removable Terminal Block is a Removable Terminal Block or RTB manufactured by Allen-Bradley/Rockwell Automation as a Flex 5000 terminal base assembly component. Terminal base assemblies form an integral part of the Flex 5000 I/O series because they offer a terminal base for I/O modules. They further provide easy field-side wiring for the I/O modules. The Allen-Bradley 5094-RTB3T RTB has a fixed CJC thermistor that offers cold junction compensation in the thermocouple circuits. It has a rear-side shield bar that shields the wiring for the Flex 5000 high-speed counter modules and analog I/O modules. Additionally, the RTB comes with the front-side keyswitches for control and setup in a single place. It also features an I/O edge connector that is used to hold the module in the right position.
The Allen-Bradley 5094-RTB3T Removable Terminal Block has an input current rating of 100 milliamps for every channel with a sensor-actuator current rating of 1.8 Amps and a pass-through current of 10 Amps at maximum. The 5094-RTB3T RTB features an input voltage ranging from 10 to 32 Volts DC and 18 Volts DC nominal voltage. It has screw-type copper I/O terminal strips to connect the I/O wiring for the Sensor Source Voltage (SSV), backplane power, embedded CJC thermistor module commons, and the user-supplied control. These terminal strips have a stranded and solid copper wire with a 0.34 x 2.5 millimeters square wire size and 1.2 millimeters of insulation. This RTB features a continuous isolation voltage rating of 250 Volts AC between the SA and chassis as well as between the chassis and input channels. This block's weight is approximately 0.5 pounds, and it measures 2.0 x 3.7 x 3.0 inches in dimensions.
The Allen-Bradley 5094-RTB3T Removable Terminal Block is a Flex 5000 Removable Terminal Block that is used with the Flex 5000 I/O System modules. It features screw-type terminals, an embedded CJC thermistor, and a voltage rating of 18 to 32 Volts DC.
F.A.Q for 5094-RTB3T
