GE / IP FANUC Series 90/30 In Stock
Home » Allen Bradley » Flex 5000 » You are here: 5094-RTB3IXT
5094-RTB3IXT
Rockwell Disclaimer: The product is used surplus. PDF Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because PDF Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, PDF Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. PDF Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. PDF Supply also makes no representations as to your right to install any such firmware on the product. PDF Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
PDF Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with PDF Supply's 1-year, 2-year, or 3-year warranty.
Other Available Revisions for the 5094-RTB3IXT 5094-RTB3IXT//A
Common misspellings:
- 5o94-RTB3IXT
- 509A-RTB3IXT
- 5094-RT83IXT
- 5094-RTB31XT
- 5094-RTB3lXT
- 5094RTB3IXT
Technical Specifications for 5094-RTB3IXT
| Brand | Allen-Bradley / Rockwell Automation |
|---|---|
| Series | Flex 5000 |
| Part number | 5094-RTB3IXT |
| Product type | Isolated terminal block |
| Housing | Open |
| Peak I/O rating | 2 Amps at 32 Volts DC |
| Peak SA power | 10 Amps at 18 to 32 Volts DC |
| Relative humidity | 5 to 95% |
| Operating shock rating | 30 g |
| Storage shock rating | 30 g |
| Maximum ambient temperature | 158 degrees Fahrenheit |
| ATEX code | T4 |
| Approvals | CE, KC, RCM standards |
About 5094-RTB3IXT
The 5094-RTB3IXT terminal block from Allen-Bradley is a Flex 5000 series removable terminal block. Note that Flex 5000 I/O equipment is not resistant to sources of ultraviolet radiation. Allen-Bradley recommends installing the 5094-RTB3IXT removable terminal block inside an ATEX Zone 2 certified enclosure which has a minimum IP 54 protection rating. All external connections to the 5094-RTB3IXT removable terminal block should be secured by threaded connectors, screws, or sliding latches that may be supplied with the block. The 5094-RTB3IXT removable terminal block should never be disconnected unless the working area is nonhazardous or unless the electrical power supply has been disconnected first. Because the equipment is ESD-sensitive, Allen-Bradley recommends use of approved grounded wristraps and static-safe workstations while working on the 5094-RTB3IXT removable terminal block.
Furthermore, only trained and experienced technicians should be tasked with installing and servicing the Flex 5000 5094-RTB3IXT removable terminal block. The peak I/O power rating of the terminal block is 2 Amps at 32 Volts DC. The peak SA power is 10 Amps at 18 to 32 Volts DC. The environmental specifications for the 5094-RTB3IXT removable terminal block include 5 to 95% non-condensing relative humidity, a 30 g operating shock rating, 158 degrees Fahrenheit of rated maximum air temperature, and 5 g vibration rating at 10 to 500 Hertz. The enclosure of the 5094-RTB3IXT removable terminal block is open and it has an ATEX/IECEx temperature code rating of T4. The wire category is dependent on the installed Flex 5000 series I/O module. Field wiring which terminates on the 5094-RTB3IXT removable terminal block should be made of copper and it should have a 0.34 to 2.55 square millimeters conductor size. The 5094-RTB3IXT removable terminal block is approved by the CE, KC, and RCM standards.
The Allen-Bradley 5094-RTB3IXT terminal block is an industrial removable terminal block. The enclosure used for the installation of the 5094-RTB3IXT removable terminal block should have an IP 54 protection rating.
F.A.Q for 5094-RTB3IXT
