GE / IP FANUC Series 90/30 In Stock
Home » Allen Bradley » Flex 5000 » You are here: 5094-RTB3ISXT
5094-RTB3ISXT
Rockwell Disclaimer: The product is used surplus. PDF Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because PDF Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, PDF Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. PDF Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. PDF Supply also makes no representations as to your right to install any such firmware on the product. PDF Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
PDF Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with PDF Supply's 1-year, 2-year, or 3-year warranty.
Other Available Revisions for the 5094-RTB3ISXT 5094-RTB3ISXT//A
Common misspellings:
- 5o94-RTB3ISXT
- 509A-RTB3ISXT
- 5094-RT83ISXT
- 5094-RTB31SXT
- 5094-RTB3lSXT
- 5094RTB3ISXT
Technical Specifications for 5094-RTB3ISXT
| Brand | Allen-Bradley / Rockwell Automation |
|---|---|
| Series | Flex 5000 |
| Part number | 5094-RTB3ISXT |
| Product type | Removable terminal block |
| North American Hazardous Location standards | Approved |
| European Hazardous Location standards | Approved |
| IEC Hazardous Location standards | Approved |
| SA power | 10 Amps at 18 to 32 Volts DC |
| I/O ratings | 2 Amps at 24 Volts DC |
| Voltage type | DC |
About 5094-RTB3ISXT
The Flex 5000 5094-RTB3ISXT RTB is a removable terminal block that has been designed, manufactured, and distributed by Allen-Bradley as part of the terminal base for the Flex 5000 I/O modules. A terminal base is composed of a removable terminal block like the 5094-RTB3ISXT removable terminal block and a mounting base. The terminal base allows an I/O module to be mounted on a DIN rail and it is the part of the assembly that hosts the wiring for the I/O module. Terminal bases simplify the wiring and the installation and maintenance processes for I/O modules and contribute to more efficient machines. The 5094-RTB3ISXT removable terminal block is one of the many RTBs that are available from the Allen-Bradley Flex 5000 series. Multiple RTBs are made to accommodate different I/O module needs, but there are only 2 mounting bases available that are compatible with all of the Flex 5000 RTBs and I/O modules.
The Allen-Bradley 5094-RTB3ISXT Flex 5000 removable terminal block has hazardous location approval ratings from the North American Hazardous Location standards, the European Hazardous Location standards, and the IEC Hazardous Location standards. However, although it can be used in specific hazardous locations, it should only be used in these locations if it has all of the proper required safety and protection features installed and if it is used properly at all times, and it should never be used in unauthorized hazardous locations. Using the 5094-RTB3ISXT removable terminal block improperly, without suitable safety measures, or in unauthorized locations can cause user injury, component damage, or even explosions.
The Allen-Bradley 5094-RTB3ISXT removable terminal block is part of the Flex 5000 series and it is made to host all of the wiring for an I/O module. It is rated for use in hazardous locations.
F.A.Q for 5094-RTB3ISXT
