GE / IP FANUC Series 90/30 In Stock
Home » Allen Bradley » Flex 5000 » You are here: 5094-RTB3I
5094-RTB3I
Rockwell Disclaimer: The product is used surplus. PDF Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because PDF Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, PDF Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. PDF Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. PDF Supply also makes no representations as to your right to install any such firmware on the product. PDF Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
PDF Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with PDF Supply's 1-year, 2-year, or 3-year warranty.
Other Available Revisions for the 5094-RTB3I 5094-RTB3I//A
Common misspellings:
- 5o94-RTB3I
- 509A-RTB3I
- 5094-RT83I
- 5094-RTB31
- 5094-RTB3l
- 5094RTB3I
Technical Specifications for 5094-RTB3I
| Brand | Allen-Bradley / Rockwell Automation |
|---|---|
| Series | Flex 5000 |
| Part number | 5094-RTB3I |
| Product type | Isolated terminal block |
| Compatible terminal bases | 5094-MB, 5094-MBXT |
| Wire size | 0.34 to 2.5 mm2 |
| Maximum wire insulation | 3/64 inches |
| Wire temperature rating | 105 degrees Celsius |
| Enclosure | Open |
| Operating temperature | -40 to 70 degrees Celsius |
| Storage temperature | -40 to 85 degrees Celsius |
| Weight | 0.45 pounds |
| Dimensions | 2.08 x 3.7 x 3.0 inches |
About 5094-RTB3I
The Allen-Bradley 5094-RTB3I terminal block is a removable terminal block. It is compatible with the mounting bases with the catalog numbers 5094-MB and 5094-MBXT. It is compatible with multiple I/O modules including the 5094-IB16S, 5094-OB16S, 5094-IF8IH, 5094-OF8IH, 5094-SERIAL, 5094-IB16SXT, 5094-OB16SXT, 5094-OF8IHXT, and 5049-SERIALXT I/O modules. The wire category which should be used with the 5094-RTB3I removable terminal block depends on the installed I/O module. The wire type which should be used with the terminal block is copper wire with a 0.34 to 2.5 square millimeters wire size and 3/64-inch insulation. The recommended temperature rating of the copper wire is 105 degrees Celsius. For screw type terminal blocks, the recommended torque specification is 3.5 pounds on an inch. The maximum I/O current rating for the 5094-RTB3I removable terminal block is 2 Amps at 32 Volts DC.
The maximum sensor actuator power rating for the 5094-RTB3I terminal block is 10 Amps at 18 to 32 Volts DC. The terminal block dimensions are 2.08 x 3.7 x 3.0 inches and its approximate weight is 0.45 pounds. The 5094-RTB3I removable terminal block has an open enclosure which is rated for -40 to 70 degrees Celsius. During storage or transportation, the ambient temperature around the terminal block should be between -40 and 85 degrees Celsius. The operating shock rating for the block is 30 g and the non-operating shock rating is also 30 g. The vibration rating for the 5094-RTB3I removable terminal block is 5 g at 10 to 500 Hertz. The relative humidity should be kept between 5 and 95% in the environment where the terminal block is installed. During the assembly of the terminal block and the mounting base, care should be taken to ensure that the mounting base is not handled by the connectors on the sides.
The 5094-RTB3I block is an Allen-Bradley Flex 5000 series isolated terminal block. The 5094-RTB3I terminal base can be used with 2 mounting bases which are the 5094-MB and 5094-MBXT mounting bases.
F.A.Q for 5094-RTB3I
