1-800-360-6802
[email protected]

GE / IP FANUC Series 90/30 In Stock

A Global Supplier of Industrial Electronics

1-800-360-6802

Mon-Fri 8AM-5PM EST

[email protected]

5094-RTB3ACXT

★★★★★Rated 4.4/5 Based on 8 ratings.

Rate your purchase of the 5094-RTB3ACXT

Rockwell Disclaimer: The product is used surplus. PDF Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because PDF Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, PDF Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. PDF Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. PDF Supply also makes no representations as to your right to install any such firmware on the product. PDF Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

PDF Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with PDF Supply's 1-year, 2-year, or 3-year warranty.

Other Available Revisions for the 5094-RTB3ACXT 5094-RTB3ACXT//A

Common misspellings:
  • 5o94-RTB3ACXT
  • 509A-RTB3ACXT
  • 5094-RT83ACXT
  • 5094RTB3ACXT

Technical Specifications for 5094-RTB3ACXT

BrandAllen-Bradley / Rockwell Automation
SeriesFlex 5000
Part number5094-RTB3ACXT
Product typeRemovable terminal block
Weight202 grams
Dimensions53 x 94 x 76 millimeters
EnclosureOpen
ATEX temperature codeT4
Operating temperature-40 to 158 degrees Fahrenheit
Storage temperature -40 to 185 degrees Fahrenheit
Wire size22 to 14 AWG
Wire typeSolid/stranded
Wire materialCopper

About 5094-RTB3ACXT

The Allen-Bradley 5094-RTB3ACXT terminal block is a removable terminal block. It is one component of a complete terminal base which is required by I/O modules for field-side wiring. The other component of a complete terminal base is a mounting base. The mounting bases and terminal blocks need to be ordered separately and then assembled. The 5094-RTB3ACXT removable terminal block is an AC terminal block which has a maximum input/output current rating of 2 Amps at 240 Volts AC. The maximum sensor actuator (SA) power rating is 10 Amps at 240 Volts AC. The rated isolation voltage is 250 Volts channel to channel and 250 Volts SA to chassis. The recommended wire size is 22 to 14 AWG solid/stranded copper wire which is rated at 221 degrees Fahrenheit or greater and has a maximum insulation thickness of 1.2 millimeters.

The dimensions of the 5094-RTB3ACXT removable terminal block are 53 x 94 x 76 millimeters. The weight of the terminal block is approximately 202 grams. The terminal block has an open enclosure. The ATEX temperature code for the 5094-RTB3ACXT removable terminal block is T4 and the North American temperature code rating is also T4. The 5094-RTB3ACXT removable terminal block is designed for extreme environments. The operating temperature range recommended by Allen Bradley for the terminal block is from -40 to 158 degrees Fahrenheit and the non-operating temperature range is from -40 to 185 degrees Fahrenheit. The corrosion resistance rating for the terminal block is the ISA S71.04 G3 rating. The 5094-RTB3ACXT removable terminal block is certified by the RCM, KC, Morocco, Ex, and IECEx standards. The installation of the terminal block should only be performed by trained and experienced technicians. Allen-Bradley also recommends following all of the recommended industrial ESD precautions for minimizing the risk of equipment damage.

The Allen-Bradley 5094-RTB3ACXT block is a Flex 5000 series removable terminal block. The 5094-RTB3ACXT removable terminal block comes in an open enclosure. 

F.A.Q for 5094-RTB3ACXT

PDF Supply sells used surplus products. PDF Supply is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by PDF Supply come with PDF Supply’s 1-year, 2-year, or 3-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.

Rockwell Disclaimer: The product is used surplus. PDF Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because PDF Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, PDF Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. PDF Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. PDF Supply also makes no representations as to your right to install any such firmware on the product. PDF Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.