GE / IP FANUC Series 90/30 In Stock
Home » Allen Bradley » Flex 5000 » You are here: 5094-RTB3ACS
5094-RTB3ACS
Rockwell Disclaimer: The product is used surplus. PDF Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because PDF Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, PDF Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. PDF Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. PDF Supply also makes no representations as to your right to install any such firmware on the product. PDF Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
PDF Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with PDF Supply's 1-year, 2-year, or 3-year warranty.
Other Available Revisions for the 5094-RTB3ACS 5094-RTB3ACS//A
Common misspellings:
- 5o94-RTB3ACS
- 509A-RTB3ACS
- 5094-RT83ACS
- 5094RTB3ACS
Technical Specifications for 5094-RTB3ACS
| Brand | Allen-Bradley / Rockwell Automation |
|---|---|
| Series | Flex 5000 |
| Part number | 5094-RTB3ACS |
| Type | Terminal block |
| Input/output ratings | 2 A at 240V AC |
| Sensor Actuator (SA) power | 10 A at 240V AC |
| Frequency | 50/60 Hz |
| Wire type | Copper |
| Dimensions (HxWxD) | 53.0 x 94.0 x 76.0 mm |
| Weight | 202 g (0.45 lb) |
| Enclosure type rating | None (open-style) |
| Wire category | Established by the installed module |
| Wire size | 0.34 to 2.5 mm2 (22 to 14 AWG) |
About 5094-RTB3ACS
The 5094-RTB3ACS terminal block is a removable terminal block that is intended to operate with the I/O modules from the FLEX 5000 family of products by Allen-Bradley. This removable terminal block needs to be paired with a mounting base and in this way, both parts can be connected to an I/O module. This part has been designed to operate with AC voltage, its structure comes with a conformal coating that helps it withstand corrosion and enables it to have a prolonged operating life. The Allen-Bradley 5094-RTB3ACS removable terminal block operates with an input and output current rating of 2 Amps and a voltage rating of 240 Volts AC. This block operates with a frequency rate of 50 to 60 Hertz. The block has a sensor-actuator (SA) power rating of 10 Amps. The block comes with an isolation voltage rating of 250 Volts AC from channel to chassis and basic insulation from the SA to the chassis.
The Allen-Bradley 5094-RTB3ACS removable terminal block can be connected to other devices by using copper wire and it has a wire category that will be determined by the installed module. The installed module needs to be compatible with the overall specifications of this removable terminal block, otherwise it is not recommended to install them together. The Allen-Bradley 5094-RTB3ACS removable terminal block has a height of 53 millimeters, a width of 94 millimeters, and a depth of 76 millimeters. It has an approximate weight of 202 grams. The 5094-RTB3ACS removable terminal block comes with an open-style enclosure. The advantage of open enclosures is that they help the block to release a higher level of heat than blocks with stronger enclosures can.
The Allen-Bradley 5094-RTB3ACS terminal block operates with an AC voltage of 240 Volts AC and it comes with an open enclosure. Installing it in a climate-controlled environment is recommended.
F.A.Q for 5094-RTB3ACS
