GE / IP FANUC Series 90/30 In Stock
Home » Allen Bradley » Flex 5000 » You are here: 5094-RTB3AC
5094-RTB3AC
Rockwell Disclaimer: The product is used surplus. PDF Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because PDF Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, PDF Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. PDF Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. PDF Supply also makes no representations as to your right to install any such firmware on the product. PDF Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
PDF Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with PDF Supply's 1-year, 2-year, or 3-year warranty.
Other Available Revisions for the 5094-RTB3AC 5094-RTB3AC//A
Common misspellings:
- 5o94-RTB3AC
- 509A-RTB3AC
- 5094-RT83AC
- 5094RTB3AC
Technical Specifications for 5094-RTB3AC
| Brand | Allen-Bradley / Rockwell Automation |
|---|---|
| Series | Flex 5000 |
| Part number | 5094-RTB3AC |
| Type | Terminal block |
| Input/output ratings | 2 A at 240V AC |
| Sensor Actuator (SA) power | 10 A at 240V AC |
| Frequency | 50/60 Hz |
| Wire type | Copper |
| Dimensions (HxWxD) | 53.0 x 94.0 x 76.0 mm |
| Weight | 202 g (0.45 lb) |
| Enclosure type rating | None (open-style) |
| Wire category | Established by installed module |
| Wire size | 0.34 to 2.5 mm2 (22 to 14 AWG) |
About 5094-RTB3AC
The 5094-RTB3AC block is a removable terminal block that has been manufactured by Allen-Bradley. This terminal block comes with an AC screw and it can be used only with devices that match its configuration. Terminal blocks work as terminal bases that can be used directly with an I/O module and their main purpose is to connect the system’s field-side wiring. These terminal blocks are composed of a mounting base and a removable terminal block. This removable terminal block must be ordered separately from the mounting base and when it is installed with a mounting base, it will be ready for use as a complete terminal block. The Allen-Bradley 5094-RTB3AC removable terminal block comes with an input and output current rating of 2 Amps at a specific voltage of 240 Volts AC and a frequency of 50 to 60 Hertz.
The Allen-Bradley 5094-RTB3AC removable terminal block can operate in a temperature of -40 to 70 degrees Celsius and in a relative humidity range of about 5 to 95 percent without condensation. The Allen-Bradley 5094-RTB3AC removable terminal block has an approximate shipping weight of 202 grams and an open enclosure type. This block uses copper wiring and the wiring category will be determined by the installed I/O module. The dimensions of the block consist of a height, width, and depth of 53, 94, and 76 millimeters, respectively. Since the block is open, it is recommended to avoid installing it in extremely dusty and dirty places since this could cause malfunctioning in the internal parts of the block and end up affecting the whole system.
The Allen-Bradley 5094-RTB3AC removable terminal block has an approximate weight of 202 grams. It is a member of the FLEX 5000 series and it can be used with AC-compatible controllers.
F.A.Q for 5094-RTB3AC
