GE / IP FANUC Series 90/30 In Stock
Home » Allen Bradley » Flex 5000 » You are here: 5094-OF8IH
5094-OF8IH
Rockwell Disclaimer: The product is used surplus. PDF Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because PDF Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, PDF Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. PDF Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. PDF Supply also makes no representations as to your right to install any such firmware on the product. PDF Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
PDF Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with PDF Supply's 1-year, 2-year, or 3-year warranty.
Other Available Revisions for the 5094-OF8IH 5094-OF8IH//A
Common misspellings:
- 5o94-OF8IH
- 509A-OF8IH
- 5094-0F8IH
- 5094-OFbIH
- 5094-OF81H
- 5094-OF8lH
- 5094OF8IH
Technical Specifications for 5094-OF8IH
| Brand | Allen-Bradley / Rockwell Automation |
|---|---|
| Series | Flex 5000 |
| Part number | 5094-OF8IH |
| Description | Analog output module |
| Channel | 8 |
| Series | A |
| Sensor actuator power | 18-32 Volts DC |
| Temperature | -40-70 degrees Celsius |
| Voltage | 24 Volts DC |
| Backplane power | 35 milliamps |
| Isolation | 250 Volts |
About 5094-OF8IH
The 5094-OF8IH module is an 8-channel analog output module manufactured by Allen-Bradley. The output module comes with HART and it is a Series A device. This Flex 5000 series module has isolated outputs and it has signals in the range of 4 to 20 milliamps. The HART module is used to convert digital values to analog values. The module comes with switch output channels that can connect to current, voltage, and output devices. The 5094-OF8IH module should be installed with a Flex 5000 I/O system. The overall system should have an Ethernet/IP adapter and a backplane for the installation of the output module. The module is powered with a backplane power of 35 milliamperes max. The sensor actuator power ranges between 18 and 32 Volts DC and the sensor actuator current is 240 milliamps. Basic insulation is present from system to field with 250 Volts continuous voltage.
The 5094-OF8IH analog output module’s operating temperature should be set between -40 and 70 degrees Celsius for regular use. The 5094-OF8IH analog output module comes with an open enclosure. It should be used for indoor applications only. The module is powered with a 24 Volts DC rated power source that is connected to the left terminal for field-side power. The backplane ASIC is connected with the backplane communication device. There are LED indicators on the front of the module to show the running power and the operating status of the module. The 5094-OF8IH analog output module is compact and it saves panel space. It can be easily mounted using a DIN rail mounting base or a panel mounting base. The module should be properly grounded during the installation.
The Allen-Bradley 5094-OF8IH module is an 8-channel analog output module. It is a Series A Flex 5000 device.
F.A.Q for 5094-OF8IH
