GE / IP FANUC Series 90/30 In Stock
Home » Allen Bradley » Flex 5000 » You are here: 5094-OB8
5094-OB8
Rockwell Disclaimer: The product is used surplus. PDF Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because PDF Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, PDF Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. PDF Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. PDF Supply also makes no representations as to your right to install any such firmware on the product. PDF Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
PDF Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with PDF Supply's 1-year, 2-year, or 3-year warranty.
Other Available Revisions for the 5094-OB8 5094-OB8//A
Common misspellings:
- 5o94-OB8
- 509A-OB8
- 5094-0B8
- 5094-O88
- 5094-OBb
- 5094OB8
Technical Specifications for 5094-OB8
| Brand | Allen-Bradley / Rockwell Automation |
|---|---|
| Series | Flex 5000 |
| Part number | 5094-OB8 |
| Description | Output module |
| Voltage | 18-32 Volts DC |
| Output | 8 |
| Output current | 2 Amperes |
| Backplane power rating | 70 milliamps |
| Wire size | 0.34-2.5 millimeters |
| Temperature | -40-70 degrees Celsius |
| CIP sync | Yes |
| Surge current | 4.8 Amps |
About 5094-OB8
The 5094-OB8 module is an Allen-Bradley output module. This Series A module runs with a voltage source of 18 to 32 Volts DC. It comes with 8 outputs. It is a digital high-current output module used in industrial automation applications. The module receives data from a controller and other input modules. The output module comes with an open enclosure. It has an output current rating of 2 Amps with voltage rating between 18 and 32 Volts DC per point. The backplane power has a rating of 70 milliamps with 15 Volts DC voltage. The sensor actuator power rating (SA) is 10 Amps. The 5094-OB8 output module comes with an isolation voltage of 250 Volts with basic insulation. No isolation is present between the SA power and the output ports. The module uses a wire size between 0.34 and 2.5 millimeters. The operating temperature range is set between -40 and 70 degrees Celsius.
The Allen-Bradley 5094-OB8 output module is equipped with a field DC to DC converter that is connected with the soft start circuitry. The backplane ASIC is connected with the status indicators and non-volatile memory. Isolation is present between the ASIC and the output circuitry. The module power is supplied by the backplane power source. The 5094-OB8 output module features field power loss detection and open load detection functions. It comes with safety features like reverse voltage protection, output short circuit protection, and over voltage protection. The output module supports CIP Sync but it has no support scheduled outputs. The pilot duty rating is 2 Amps. The surge current per point is maintained at 4.8 Amps for a time period of 50 milliseconds.
The 5094-OB8 module is an output module by Allen-Bradley. It has a voltage rating of 18 to 32 Volts DC.
F.A.Q for 5094-OB8
