GE / IP FANUC Series 90/30 In Stock
Home » Allen Bradley » Flex 5000 » You are here: 5094-OB16SXT
5094-OB16SXT
Rockwell Disclaimer: The product is used surplus. PDF Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because PDF Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, PDF Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. PDF Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. PDF Supply also makes no representations as to your right to install any such firmware on the product. PDF Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
PDF Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with PDF Supply's 1-year, 2-year, or 3-year warranty.
Other Available Revisions for the 5094-OB16SXT 5094-OB16SXT//A
Common misspellings:
- 5o94-OB16SXT
- 509A-OB16SXT
- 5094-0B16SXT
- 5094-O816SXT
- 5094-OBl6SXT
- 5094OB16SXT
Technical Specifications for 5094-OB16SXT
| Brand | Allen-Bradley / Rockwell Automation |
|---|---|
| Series | Flex 5000 |
| Part number | 5094-OB16SXT |
| Product type | Digital I/O |
| Outputs | 16 |
| Approvals | c-UL-us, CE, RC, KC |
| SA voltage range | 18 to 32 Volts DC |
| Backplane voltage | 15 Volts DC |
| Backplane current | 100 milliamps |
| Operating shock rating | 30 g |
| Wire size for signal | 22 to 14 AWG |
| Operating temperature | -40 to 158 degrees Fahrenheit |
| Storage temperature | -40 degrees Fahrenheit and maximum 185 degrees Fahrenheit |
About 5094-OB16SXT
The 5094-OB16SXT module is an Allen-Bradley Flex 5000 series digital output module. A total of 16 output points are provided on the module which are all part of the same group. The 5094-OB16SXT module is certified by the c-UL-us, CE, RC, and KC standards. The operating temperature range for the 5094-OB16SXT module is -40 to 158 degrees Fahrenheit and the operating relative humidity range is 5 to 95%. If the recommended operating thresholds are exceeded, then the module may be damaged or the performance of the module may vary from the rated values. Unused 5094-OB16SXT modules should be kept in an environment where ambient temperature is kept between -40 degrees Fahrenheit and 185 degrees Fahrenheit. The operating and non-operating shock ratings for the module are both 30 g.
The wire size for signals that is recommended by Allen-Bradley for use with the 5094-OB16SXT output module is 22 to 14 AWG solid or stranded copper wire. The wire type recommended for the power connections is 14 AWG copper multi-strand wire. The module requires 15 Volts DC backplane power and it draws 100 milliamps current. The voltage range for the module outputs is 18 to 32 Volts DC. The sensor actuator power voltage range and the maximum current are 18 to 32 Volts DC and 8.2 Amps, respectively. No isolation is available on the 5094-OB16SXT output module between the SA power and output ports or between individual output ports. The isolation between the system and the field side is 250 Volts continuous. One green/red status indicator is available on the module for module status updates. Additionally, one LED indicator is provided for each output point.
The Allen-Bradley 5094-OB16SXT module is a digital output module. It belongs to the Flex 5000 I/O product line.
F.A.Q for 5094-OB16SXT
