GE / IP FANUC Series 90/30 In Stock
Home » Allen Bradley » Flex 5000 » You are here: 5094-MB
5094-MB
Rockwell Disclaimer: The product is used surplus. PDF Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because PDF Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, PDF Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. PDF Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. PDF Supply also makes no representations as to your right to install any such firmware on the product. PDF Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
PDF Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with PDF Supply's 1-year, 2-year, or 3-year warranty.
Other Available Revisions for the 5094-MB 5094-MB//A5094-MB//B
Common misspellings:
- 5o94-MB
- 509A-MB
- 5094-M8
- 5094MB
Technical Specifications for 5094-MB
| Brand | Allen-Bradley / Rockwell Automation |
|---|---|
| Series | Flex 5000 |
| Part number | 5094-MB |
| Usage | Mounting base for terminal base |
| Compatibility | 5094-RTB3, 5094-RTB3S, 5094-RTB3W, 5094-RTB3WS, 5094-RTB3T, 5094-RTB3TS, 5094-RTB3I, 5094-RTB3IS, etc. |
| Maximum backplane power (BP) | 100 milli Amps at 15 Volts DC |
| Maximum backplane power (VCC) | 15 milli Amps at 3.3 Volts |
| DIN rail material | Zinc-plated, chromate-passivated steel |
| DIN rail dimensions | 35 x 7.5 millimeters (1.38 x 0.3 inches) |
| Enclosure type | Open |
| Temperature code (North American / ATEX / IECEx) | T4 |
| Weight | 71 grams (0.16 pounds) |
| Dimensions (H x W x D) | 85 x 94 x 37.5 millimeters (3.35 x 3.7 x 1.48 inches) |
About 5094-MB
The catalog number 5094-MB is reserved for a mounting base for modules from the FLEX 5000 product series by Allen-Bradley/Rockwell Automation. The mounting base is sold separately from the modules that it supports and it is made to be paired with compatible removable terminal blocks. The 5094-MB mounting base is used with a variety of different RTB components and it is an essential part of the terminal base that is needed for proper operation of the FLEX 5000 system. The compatible modules have features like electronic keying, different mounting options, user-performed calibration, I/O status indicators, overvoltage and overcurrent protection, different module conversion methods, short and open circuit detection capabilities, and fast scan times. The FLEX 5000 modules are built for different voltage ranges and they support operation in current, voltage, RTB and thermocouple modes.
The 5094-MB mounting base mounts on a DIN rail made from high-quality steel. The steel DIN rail should also be zinc-plated and chromate-passivated. The DIN rail has dimensions of 35 x 7.5 millimeters (1.38 x 0.30 inches) according to the EN60715 standards. The compatible RTB models include the 5094-RTB3, 5094-RTB3XT, 5094-RTB3W, 5094-RTB3WXT, and the 5094-RTB3IXT RTBs. The 5094-MB mounting base has a maximum backplane power of 100 milliamps at 15 Volts DC and maximum backplane power of 15 milliamps at 3.3 Volts. The unit carries a T4 temperature code and it does not include an enclosure. The dimensions of the 5094-MB mounting base include a height of 85 millimeters (3.35 inches), a width of 94 millimeters (3.7 inches), and a depth of 37.5 millimeters (1.48 inches). The weight of the module is 71 grams or 0.16 pounds.
The 5094-MB mounting base is a terminal base assembly component used with the Flex 5000 modules from Allen-Bradley/Rockwell Automation. The 5094-MB mounting base for these modules is made from high-quality and durable material.
F.A.Q for 5094-MB
