GE / IP FANUC Series 90/30 In Stock
Home » Allen Bradley » Flex 5000 » You are here: 5094-IF8IHXT
5094-IF8IHXT
Rockwell Disclaimer: The product is used surplus. PDF Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because PDF Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, PDF Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. PDF Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. PDF Supply also makes no representations as to your right to install any such firmware on the product. PDF Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
PDF Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with PDF Supply's 1-year, 2-year, or 3-year warranty.
Other Available Revisions for the 5094-IF8IHXT 5094-IF8IHXT//A
Common misspellings:
- 5o94-IF8IHXT
- 509A-IF8IHXT
- 5094-1F8IHXT
- 5094-lF8IHXT
- 5094-IFbIHXT
- 5094-IF81HXT
- 5094-IF8lHXT
- 5094IF8IHXT
Technical Specifications for 5094-IF8IHXT
| Brand | Allen-Bradley / Rockwell Automation |
|---|---|
| Series | Flex 5000 |
| Part number | 5094-IF8IHXT |
| Product type | HART input module |
| HART protocol | Supported |
| Number of inputs | 8 |
| Input isolation | Supported |
| Current inputs | Supported |
| Voltage inputs | Supported |
| HART inputs | Supported |
About 5094-IF8IHXT
The Allen-Bradley 5094-IF8IHXT module is an analog HART input module that has been manufactured as part of the FLEX 5000 controller series. The 5094-IF8IHXT module is a specialized FLEX 5000 input module that uses the HART protocol. It has 8 analog input channels that are all isolated and that can all be used as current inputs, voltage inputs, or HART inputs. The 5094-IF8IHXT HART input module draws its power from an external source that is rated at 24 Volts DC and that must be connected to it on the left side. This module can be wired to a variety of devices that include 2-wire current and HART transmitters, 3-wire current and HART transmitters, 4-wire current and HART transmitters, digital input sensors, 2-wire voltage transmitters, and 4-wire voltage transmitters.
The Allen-Bradley FLEX 5000 5094-IF8IHXT analog HART input module supports differential signals and current sourcing with all of its inputs. The input voltage ranges that it can support are +/- 10 Volts, 0 to 10 Volts, and 0 to 5 Volts, while the input current ranges that it can support are 0 to 20 milliamps and 4 to 20 milliamps (with the HART protocol). The 5094-IF8IHXT HART input module uses the basic insulation type between its inputs and the continuous isolation voltage rating is 250 Volts. The module conversion method that the 5094-IF8IHXT HART input module uses is the Sigma-Delta conversion method. Its scan time is rated at 1 millisecond both per channel and per module. It supports real-time channel sampling and the IEEE 754 32-bit floating point data format. The maximum ambient air temperature rating is 158 degrees Fahrenheit.
The Allen-Bradley 5094-IF8IHXT HART module is an analog input module that supports 8 input channels and the HART protocol. Its nominal voltage rating is 24 Volts DC.
F.A.Q for 5094-IF8IHXT
