GE / IP FANUC Series 90/30 In Stock
Home » Allen Bradley » Flex 5000 » You are here: 5094-IF8IH
5094-IF8IH
Rockwell Disclaimer: The product is used surplus. PDF Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because PDF Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, PDF Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. PDF Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. PDF Supply also makes no representations as to your right to install any such firmware on the product. PDF Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
PDF Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with PDF Supply's 1-year, 2-year, or 3-year warranty.
Other Available Revisions for the 5094-IF8IH 5094-IF8IH//A
Common misspellings:
- 5o94-IF8IH
- 509A-IF8IH
- 5094-1F8IH
- 5094-lF8IH
- 5094-IFbIH
- 5094-IF81H
- 5094-IF8lH
- 5094IF8IH
Technical Specifications for 5094-IF8IH
| Brand | Allen-Bradley / Rockwell Automation |
|---|---|
| Series | Flex 5000 |
| Part number | 5094-IF8IH |
| Number of inputs | 8 individually isolated inputs |
| Input range for voltage mode | +/-10 Volts |
| Input range for current mode | 0 to 20 milli Amps or 4 to 20 milli Amps (HART) |
| HART scan time | 1 second (typical) |
| Minimum on-state current | 1.8 milliamps |
| Maximum off-state current | 1.6 milliamps |
| Isolation voltage | 250 Volts (continuous) |
| Module keying | Mechanical or electronic keying |
| Enclosure type | Open |
| Weight | 160 grams (0.35 pounds) |
| Dimensions (HxWxD) | 87 x 94 x 54 millimeters (3.43 x 3.7 x 2.13 inches) |
About 5094-IF8IH
The catalog number 5094-IF8IH refers to an Allen-Bradley input module that is used for FLEX 5000 systems. The 5094-IF8IH input module is an analog HART input module that provides 8 individually isolated inputs. The module has capabilities such as current sourcing, 1 second of maximum HART scan time, Sigma-Delta conversion, and differential signal support. The 5094-IF8IH analog input module uses 24 Volts DC field-side power and it has an input voltage range of 0 to 10 Volts and 0 to 5 Volts. The current range for the input is 0 to 20 milliamps in general and 4 to 20 milliamps when the HART modem is used. The typical channel to channel isolation for continuous operation is 250 Volts. The channel to channel isolation refers to the basic insulation type.
The Sigma-Delta conversion method supported by the 5094-IF8IH module features 24-bit ADC per channel. The effective resolution for voltage operation is 18 bits for +/- 10 Volts and the effective resolution for current operation is 17 bits for both ranges. The effective resolution is measured at a 60-Hertz notch filter. The maximum overvoltage protection for both the voltage and current mode is +/- 32 Volts DC. The minimum sourcing voltage per channel is 20 Volts DC and the maximum sourcing current per channel is 25 milliamps. Additionally, the 5094-IF8IH module has features like real-time channel sampling, scaling to engineering units, onboard data alarming, input timestamps, and the CIP sync. The module uses an IEEE 754 data format with 32-bit floating point data and it comes with multiple keying capabilities.
The 5094-IF8IH module is an Allen-Bradley/Rockwell Automation analog module that comes with 8 individually isolated input channels and support for current, voltage, and HART operation. The module has a weight of 160 grams (0.35 pounds) and it features the following dimensions (H x W x D): 87 x 94 x 54 millimeters (3.43 x 3.7 x 2.13 inches).
F.A.Q for 5094-IF8IH
