GE / IP FANUC Series 90/30 In Stock
Home » Allen Bradley » Flex 5000 » You are here: 5094-AENSFPR
5094-AENSFPR
Rockwell Disclaimer: The product is used surplus. PDF Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because PDF Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, PDF Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. PDF Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. PDF Supply also makes no representations as to your right to install any such firmware on the product. PDF Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
PDF Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with PDF Supply's 1-year, 2-year, or 3-year warranty.
Other Available Revisions for the 5094-AENSFPR 5094-AENSFPR//A
Common misspellings:
- 5o94-AENSFPR
- 509A-AENSFPR
- 5094AENSFPR
Technical Specifications for 5094-AENSFPR
| Brand | Allen-Bradley / Rockwell Automation |
|---|---|
| Series | Flex 5000 |
| Part Number | 5094-AENSFPR |
| Product Type | Ethernet/IP SFP Adapter |
| Product Line | FLEX 5000 I/O |
| Voltage Rating | 18 to 32V DC |
| Current Rating | 1250 mA |
| Inrush Voltage Rating | 18 to 32V DC |
| Inrush Current Rating | 3200 mA for 100 ms |
| Backplane Voltage | 15V DC |
| Backplane Current | 1060 mA |
| Maximum Thermal Dissipation | 19.8 BTU per hour at 24V DC |
| Maximum Power Dissipation | 5.8 W at 18V DC |
| Wire Type | Copper |
| Wire Size | 22 to 14 AWG |
| Isolation Voltage | 300V (continuous), Basic Insulation Type |
About 5094-AENSFPR
Allen-Bradley manufactures the 5094-AENSFPR Ethernet/IP SFP Adapter Module as a member of the FLEX 5000 I/O series. This adapter is used in the current drives by Allen-Bradley for the transfer of data and information. It uses the Ethernet/IP protocol, which is an industrial network protocol which supports common industry protocols used in factories and industries. The wired interface of a FLEX 5000 system requires an Ethernet adapter, and the connection is made by using the RS-45 port in the adapter. This adapter operates using a voltage ranging from 18 to 32 Volts DC and it has a current rating of 1250 milliamps. Other specifications of the 5094-AENSFPR Ethernet SFP Adapter Module include an inrush current of 3200 milliamps for up to 100 milliseconds and an operating temperature range of -40 to 70 degrees Celsius. Additionally, the maximum relative environmental humidity rating of this unit is 95 percent, non-condensing. It is certified for compliance with the RCM, CE, KC, and Ex standards.
The Allen-Bradley 5094-AENSFPR Ethernet/IP SFP Adapter Module can tolerate vibrations of up to 5 g at a frequency range of 10 to 500 Hertz, as well as a non-operational shock of up to 30 g. The emissions from this adapter module meet the standards of the IEC 61000-6-4 regulations. This adapter module enables the high-speed transfer of data between the Logix controller and other modules in the system, and it dissipates 5.8 Watts of maximum power during operation with a voltage supply rated at 15 Volts DC. It also has a thermal dissipation rating of 19.8 BTU per hour at 24 Volts DC (maximum). This adapter module has an isolation voltage rating of 300 Volts, and it also has basic insulation. The Allen-Bradley 5094-AENSFPR Adapter Module features the MOD Power Bus that is required for its operation and that is also connected to the I/O module.
The Allen-Bradley 5094-AENSFPR Ethernet/IP Adapter is a member of the FLEX 5000 I/O series. It has a voltage rating of 18 to 32 Volts DC and current ratings of 1250 mA, MP.
F.A.Q for 5094-AENSFPR
