GE / IP FANUC Series 90/30 In Stock
Home » Allen Bradley » Flex 5000 » You are here: 5094-AENRTBS-QTY5
5094-AENRTBS-QTY5
Rockwell Disclaimer: The product is used surplus. PDF Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because PDF Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, PDF Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. PDF Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. PDF Supply also makes no representations as to your right to install any such firmware on the product. PDF Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
PDF Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with PDF Supply's 1-year, 2-year, or 3-year warranty.
Other Available Revisions for the 5094-AENRTBS-QTY5 5094-AENRTBS-QTY5//A
Common misspellings:
- 5o94-AENRTBS-QTY5
- 509A-AENRTBS-QTY5
- 5094-AENRT8S-QTY5
- 5094AENRTBSQTY5
Technical Specifications for 5094-AENRTBS-QTY5
| Brand | Allen-Bradley / Rockwell Automation |
|---|---|
| Series | Flex 5000 |
| Part Number | 5094-AENRTBS-QTY5 |
| Product Type | Removable Terminal Block (RTB) |
| Product Line | FLEX 5000 |
| Compatible Adapters | Ethernet/IP Adapters |
| Wire Size | 22 to 14 AWG |
| Maximum Surrounding Air Temperature | 70 degrees Celsius |
| Mounting | DIN Rail |
| Enclosure | IP00 (Open) |
| Quantity per Pack | 5 |
| Type | Spring Type RTB |
| Inrush Current | 5 A |
| Compliance | CE |
About 5094-AENRTBS-QTY5
The Allen-Bradley 5094-AENRTBS-QTY5 Block is a Removable Terminal Block (RTB) manufactured as part of the FLEX 5000 series for use with the Ethernet/IP adapters from the same series. These adapters are spring-type adapters, and they make use of stranded copper wire. This removable terminal block is a spring type block, and it is installed on the Ethernet/IP adapter which supports DIN rail mounting. The Ethernet adapters in the Flex 5000 series are used for the high-speed transfer of data and instructions, and they are utilized in industrial automation applications. The Allen-Bradley 5094-AENRTBS-QTY5 RTB uses the 22 to 14 AWG wire for connection purposes, and these wires are thickly insulated to provide enhanced heavy-duty performance.
The Allen-Bradley 5094-AENRTBS-QTY5 RTB is installed on the front of the Ethernet/IP network. The adapter also features an open enclosure, and the removable terminal block is used for supplying power to the adapter and for supplying the adapter’s bus power. It has an ambient temperature rating not exceeding 70 degrees Celsius. The 5094-AENRTBS-QTY5 RTB is approved and certified for compliance with the CE standards as well as other industrial environmental safety requirements. The FLEX 5000 network adapter utilizes the rotary switches found on the front side to help switch between different IP addresses. The operators should disconnect the power supply from the adapter while installing the removable terminal block. The 5094-AENRTBS-QTY5 Removable Terminal Block latches into place easily on the adapter, and it is also easy to remove. Adapters used with this RTB require 300 Volts of isolation voltage with basic insulation.
Allen-Bradley manufactures the 5094-AENRTBS-QTY5 Removable Terminal Block or RTB as part of the FLEX 5000 product family. It comes in a pack of 5 spring-type RTBs.
F.A.Q for 5094-AENRTBS-QTY5
