GE / IP FANUC Series 90/30 In Stock
Home » Allen Bradley » Flex 5000 » You are here: 5094-AENRTB-QTY5
5094-AENRTB-QTY5
Rockwell Disclaimer: The product is used surplus. PDF Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because PDF Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, PDF Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. PDF Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. PDF Supply also makes no representations as to your right to install any such firmware on the product. PDF Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
PDF Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with PDF Supply's 1-year, 2-year, or 3-year warranty.
Other Available Revisions for the 5094-AENRTB-QTY5 5094-AENRTB-QTY5//A
Common misspellings:
- 5o94-AENRTB-QTY5
- 509A-AENRTB-QTY5
- 5094-AENRT8-QTY5
- 5094AENRTBQTY5
Technical Specifications for 5094-AENRTB-QTY5
| Brand | Allen-Bradley / Rockwell Automation |
|---|---|
| Series | Flex 5000 |
| Part Number | 5094-AENRTB-QTY5 |
| Product Type | Removable Terminal Block (RTB) |
| Product Line | FLEX 5000 |
| Compatible Devices | Ethernet/IP Adapters |
| Quantity/Type per Pack | 5 Screw Type RTBs |
| Wire Size | 22 to 14 AWG |
| Torque | 0.4 N-m |
| Wire Strip Length | 12 mm |
| Mounting | DIN Rail |
| Enclosure | Open (IP00) |
| Surrounding Air Temperature | 0 to 70 degrees Celsius |
| Required Voltage Range | 18 to 32V DC |
About 5094-AENRTB-QTY5
The 5094-AENRTB-QTY5 Block is a Removable Terminal Block (RTB) by Allen-Bradley/Rockwell Automation manufactured as part of the FLEX 5000 product line. This module is used alongside the FLEX 5000 Ethernet/IP adapters and it comes in a pack of 5 screw-type RTBs. It supports a 22 to14 AWG wire size, with a wire strip measuring approximately 12 millimeters. This removable terminal block uses either stranded or solid copper wire for connections. These wires are very specific wires and they come with a thick insulation designed for use with only single-wire connections. The Allen-Bradley 5094-AENRTB-QTY5 RTB features a temperature rating of 105 degrees Celsius and it comes with 0.4 N-m torque. The FLEX 5000 adapter uses an RJ-45 port that transfers information and data at high speed to and from the industrial network between the Logix controllers and I/O modules.
The Allen-Bradley 5094-AENRTB-QTY5 RTB allows for installation at the adapter’s bottom right side, and this adapter also comes with a PRP/DLR switch. The removable terminal block also has 4 LED indicators on the front side and they are used to indicate the current network status. By using the DIN rail mounting base, the network adapter supports both horizontal and vertical mounting. There should be 1 inch of space left for ventilation around the adapter while mounting the adapter. The module powered by the 5094-AENRTB-QTY5 RTB requires a current rating of 10 Amps at maximum and a voltage range from 18 to 32 Volts DC. It has a surrounding air temperature range of 0 to 70 degrees Celsius. This adapter features an IP 00 open enclosure type and it is suitable only for indoor use.
The Allen-Bradley 5094-AENRTB-QTY5 Removable Terminal Block belongs to the Flex 5000 Series. It uses a 22 to 14 AWG wire size and it has a torque of 0.4 N-m.
F.A.Q for 5094-AENRTB-QTY5
