Allen Bradley | Flex 5000

The Allen-Bradley 5094-AEN2SFPR FLEX 5000 adapter module uses the Ethernet/IP network to allow Logix 5000 controllers and remote I/O modules to communicate. This module can communicate at speeds of 10 Mbps, 100 Mbps, or 1 Gbps.

The Allen-Bradley FLEX 5000 5094-AEN2SFPRXT adapter module communicates through the Ethernet/IP network. It has the capacity to support 16 I/O modules in 1 system.

The Allen-Bradley 5094-AEN2TR FLEX 5000 Ethernet/IP Adapter features two RJ45 ports. It has a voltage and current ratings of 18 to 32 Volts DC and 1880 milliamps, respectively.

The Allen-Bradley 5094-AEN2TRXT FLEX 5000 adapter module supports 16 I/O modules and uses the Ethernet/IP network.

The Allen-Bradley 5094-AENRTB-QTY5 Removable Terminal Block belongs to the Flex 5000 Series. It uses a 22 to 14 AWG wire size and it has a torque of 0.4 N-m.

Allen-Bradley manufactures the 5094-AENRTBS-QTY5 Removable Terminal Block or RTB as part of the FLEX 5000 product family. It comes in a pack of 5 spring-type RTBs.

The Allen-Bradley 5094-AENSFPR Ethernet/IP Adapter is a member of the FLEX 5000 I/O series. It has a voltage rating of 18 to 32 Volts DC and current ratings of 1250 mA, MP.

The Allen-Bradley 5094-AENSFPRXT Ethernet/IP Adapter is a FLEX 5000 I/O product. It features RJ45 ports with MP voltage and current ratings of 18 to 32 Volts DC and 1250 milliamps, respectively.

The Allen-Bradley 5094-AENTR EtherNet/IP Adapter is part of the FLEX 5000 series and it comes with 2 RJ45 ports. It features a voltage rating of 18 to 32 Volts DC, and a 1250 milliamps current rating.

The 5094-AENTRXT Ethernet/IP adapter module is manufactured by Allen-Bradley to support 1 to 8 FLEX 5000 I/O modules in a controller system. It can communicate over the Ethernet network at a speed of up to 1 Gbps.

The Allen-Bradley 5094-CE05 connector cable is designed to connect 2 separate banks of I/O modules in a Flex 5000 series system together. This cable is rated for a backplane power level of 1.8 Amps at 15 Volts DC.

The Allen-Bradley 5094-CE10 interconnect cable belongs to the 5094 line of interconnect cables and it is part of the FLEX 5000 series of I/O modules. It features a backplane power rating of 1.8 Amps at 15 Volts DC with a cable length measuring 1 meter or 3.3 feet.

The Allen-Bradley 5094-CE30 interconnect cable is a member of the 5094 series of interconnect cables from the FLEX 5000 I/O module series. This cable has a maximum current rating of 1.8 Amps at 15 Volts DC backplane power with a cable length 3 meters (10 feet).

The Allen-Bradley 5094-ECR-QTY5 backplane end cap is part of the FLEX 5000 I/O module series. It comes with a FLEX 5000 EtherNet/IP adapter in a pack of 5 end caps.

The Allen-Bradley 5094-HSC High-speed Counter Module is manufactured as part of the FLEX 5000 I/O module series. It has an on-state voltage of 18 Volts DC (minimum), a nominal voltage of 24 Volts DC, and an on-state voltage of 32 Volts DC (maximum).

The Allen-Bradley FLEX 5000 5094-HSCXT high-speed counter module is a specialty module that can enhance FLEX 5000 controllers. It uses DC voltage and it has 2 inputs and 4 outputs.

The Allen-Bradley 5094-IA16 input module from the Flex 5000 series is a digital I/O module with 16 input points. It has a nominal voltage rating of 120 Volts AC. 

The Allen-Bradley 5094-IB16 input module is a FLEX 5000 series module with 16 DC inputs. It uses Ethernet to control other modules and it is controlled by an owner-controller module.

The Allen-Bradley 5094-IB16S input module from the FLEX 5000 series is a 16-point safety module. It is made to be controlled by a safety controller and its operating voltage range is 18 to 32 Volts DC.

The Allen-Bradley 5094-IB16SXT module is a 16-point safety digital sinking input module manufactured as part of the FLEX 5000 I/O system. It has an on-state voltage of 10 to 32 Volts DC. 

The Allen-Bradley 5094-IB16 Safety Digital Sinking Input Module is manufactured as part of the FLEX 5000 I/O modules. It has on-state voltage of 10 to 32 Volts DC and an on-state current of 2 milliamps at 10 Volts DC.

The Allen-Bradley 5094-IB32 DC digital input module is manufactured as part of the FLEX 5000 I/O modules. This module has a power voltage range of 10 to 32 Volts DC and it comes with 32 input channels.

The 5094-IB16S Safety Digital Sinking Input Module is manufactured by Allen-Bradley/Rockwell Automation as part of the FLEX 5000 product line. It has an on-state voltage of 10 to 32 Volts DC, with an on-state current of 2.4 milliamps at 10 Volts.

The Allen-Bradley 5094-IF8 8-Channel Analog Current/Voltage Input Module is manufactured as part of the FLEX 5000 I/O modules. It has 8 single-ended inputs with an input current range 0 to 20 milliamps or 4 to 20 milliamps.

The 5094-IF8IH module is an Allen-Bradley/Rockwell Automation analog module that comes with 8 individually isolated input channels and support for current, voltage, and HART operation. The module has a weight of 160 grams (0.35 pounds) and it features the following dimensions (H x W x D): 87 x 94 x 54 millimeters (3.43 x 3.7 x 2.13 inches).

The Allen-Bradley 5094-IF8IHXT HART module is an analog input module that supports 8 input channels and the HART protocol. Its nominal voltage rating is 24 Volts DC.

The 5094-IF8XT analog I/O module is designed and manufactured by Allen-Bradley/Rockwell Automation and it integrates with the Flex 5000 systems. The unit has 8 single-ended inputs and a voltage mode input range of 0 to 10 Volts or 0 to 5 Volts.

The digital 8-channel input module with the product code 5094-IM8 is manufactured by Allen-Bradley/Rockwell Automation and it is intended for use on power sources with an input voltage rating of 240 Volts AC. The module is part of the Flex 5000 series and it features an open enclosure.

The 5094-IY8 module is an Allen-Bradley/Rockwell Automation module used for highly-efficient and powerful Flex 5000 systems. This analog input module has 8 channels and it provides inputs for current, voltage, RTD, and thermocouple connections.

The 5094-IY8XT FLEX 5000 analog input module with 8 differential and single-ended channels is designed by Allen-Bradley/Rockwell Automation. The module has an open enclosure and it can be mounted in both horizontal and vertical positions.

The 5094-MB mounting base is a terminal base assembly component used with the Flex 5000 modules from Allen-Bradley/Rockwell Automation. The 5094-MB mounting base for these modules is made from high-quality and durable material.

The mounting base with the product code 5094-MBXT is a part of a complete terminal base assembly along with a compatible removable terminal block. The mounting base is intended for industrial modules from the FLEX 5000 series by Allen-Bradley/Rockwell Automation.

The 5094-N2 module is a filler module for a terminal base assembly from the FLEX 5000 system. The module is designed and produced by Allen-Bradley/Rockwell Automation.

The 5094-OA16 module is a digital output module intended for AC power sources. This FLEX 5000 module is manufactured by Allen-Bradley/Rockwell Automation and it operates on 120 to 240 Volts AC.

The 5094-OB16 module is a DC digital output module intended for use on a power source with an 18 to 32 Volts DC voltage range. This Allen-Bradley/Rockwell Automation FLEX 5000 series sourcing module has 16 available channels and it has a backplane power voltage of 15 Volts DC.

The 5094-OB16S module is a safety I/O module from the Allen-Bradley Flex 5000 series. The module has 16 sourcing type outputs.

The Allen-Bradley 5094-OB16SXT module is a digital output module. It belongs to the Flex 5000 I/O product line.

The Allen-Bradley 5094-OB16XT output module is a Flex 5000 series output module. The module has 16 output points.

The 5094-OB32 module is a Flex 5000 series digital I/O module from Allen-Bradley. It comes with 32 sourcing type output points.

The 5094-OB8 module is an output module by Allen-Bradley. It has a voltage rating of 18 to 32 Volts DC.

The 5094-OF8 module is an analog output module by Allen-Bradley. It runs with 24 Volts DC.

The Allen-Bradley 5094-OF8IH module is an 8-channel analog output module. It is a Series A Flex 5000 device.

The Allen-Bradley 5094-OF8IHXT module is a Flex 5000 analog output module. It comes with HART technology.

The Allen-Bradley 5094-OF8XT module is an analog current/voltage output module. It has a voltage rating of 24 Volts DC.

The Allen-Bradley 5094-OW4IS module from the Flex 5000 series is an output module that has 4 relay outputs. It is a safety module that is meant to work specifically with Allen-Bradley safety controllers.

The Flex 5000 series output module that is known as the 5094-OW4ISXT output module is a safety output module with 4 channels. It is manufactured by Allen-Bradley to operate in extreme environments.

The Allen-Bradley/Rockwell Automation 5094-OW8I digital output module features 8 relay outputs that are all isolated. It can control 8 different output devices with the producer-consumer communication method.

The Allen-Bradley 5094-OW8IXT output module is an 8-point FLEX 5000 series output module with isolated outputs.

The Allen-Bradley 5094-RTB3 terminal block is a FLEX 5000 removable terminal block (RTB). This terminal block can connect to a mounting base to become a terminal base assembly for a FLEX 5000 I/O module.

The Allen-Bradley 5094-RTB32C removable terminal block is a key component of a terminal base that can support a 32-point output module from the Flex 5000 product line. It can be protected by a shield bar.

The 5094-RTB32CS removable terminal block is manufactured by Allen-Bradley in the Flex 5000 product series. This removable terminal block or RTB connects to the 5094-MB mounting base to make a complete terminal base.

The FLEX 5000 5094-RTB32CXT removable terminal block is manufactured by Allen-Bradley/Rockwell Automation that connects to a mounting base to make a complete terminal base. Its SA power rating is 10 Amps at 18 to 32 Volts DC.

The 5094-RTB32V removable terminal block is made by Allen-Bradley/Rockwell Automation in the Flex 5000 series of I/O modules and accessories. It is a Wire Category 2 device.

The Allen-Bradley Flex 5000 5094-RTB32VS removable terminal block operates with DC voltage and uses copper wiring. It can be used with compatible controllers only.

The Allen-Bradley 5094-RTB32VSXT removable terminal block is part of the FLEX 5000 series. It comes with a conformal coating that impedes corrosion.

The Allen-Bradley 5094-RTB32VXT removable terminal block is a terminal block in the FLEX 5000 series. It does not include any kind of enclosure although it has been manufactured with a conformal coating that protects it against corrosion.

The Allen-Bradley 5094-RTB3AC removable terminal block has an approximate weight of 202 grams. It is a member of the FLEX 5000 series and it can be used with AC-compatible controllers.

The Allen-Bradley 5094-RTB3ACS terminal block operates with an AC voltage of 240 Volts AC and it comes with an open enclosure. Installing it in a climate-controlled environment is recommended.

The 5094-RTB3ACSXT removable terminal block is a member of the Allen-Bradley Flex 5000 series and it is made to be a key component in the terminal bases for the Flex 5000 I/O modules. It measures 2.1 x 3.7 x 3.4 inches and weighs 0.33 pounds.

The Allen-Bradley 5094-RTB3ACXT block is a Flex 5000 series removable terminal block. The 5094-RTB3ACXT removable terminal block comes in an open enclosure. 

The 5094-RTB3I block is an Allen-Bradley Flex 5000 series isolated terminal block. The 5094-RTB3I terminal base can be used with 2 mounting bases which are the 5094-MB and 5094-MBXT mounting bases.

The Allen-Bradley 5094-RTB3IS block is a Flex 5000 series removable terminal block. The 5094-RTB3IS removable terminal block is rated for 250 Volts isolation between the channels and chassis.

The Allen-Bradley 5094-RTB3ISXT removable terminal block is part of the Flex 5000 series and it is made to host all of the wiring for an I/O module. It is rated for use in hazardous locations.

The Allen-Bradley 5094-RTB3IXT terminal block is an industrial removable terminal block. The enclosure used for the installation of the 5094-RTB3IXT removable terminal block should have an IP 54 protection rating.

The Allen-Bradley 5094-RTB3S Removable Terminal Block is manufactured as part of the Flex 5000 I/O system. It has an operating voltage range of 18 to 32 Volts DC.

The Allen-Bradley 5094-RTB3SXT Removable Terminal Block is part of the Flex 5000 RTB series and it is intended for use with the Flex 5000 I/O system. It features a spring-type terminal with a maximum load of 2 Amps per channel and an operating voltage range of 18 to 32 Volts DC.

The Allen-Bradley 5094-RTB3T Removable Terminal Block is a Flex 5000 Removable Terminal Block that is used with the Flex 5000 I/O System modules. It features screw-type terminals, an embedded CJC thermistor, and a voltage rating of 18 to 32 Volts DC.

The Allen-Bradley 5094-RTB3TS block is a CJC Removable Terminal Block (RTB) in the Flex 5000 series intended for use with the Flex 5000 I/O system modules. It features spring-type terminals with an embedded CJC thermistor.

The 5094-RTB3TSXT Block is a Flex 5000 Removable Terminal Block with an embedded CJC thermistor. It has a voltage rating of 10 Volts DC and it has an SSV output rating of 1.8 Amps at 24 Volts DC.

The Allen-Bradley 5094-RTB3TXT block is an RTB or Removable Terminal Block manufactured as a member of the Flex 5000 series for use with the Flex 5000 I/O System. It features screw-type terminals with an embedded CJC thermistor.

The Allen-Bradley 5094-RTB3W removable terminal block is a Flex 5000 module. It has a SA current rating of 10 Amps, with an IP 54 ingress protection rating.

The Allen-Bradley 5094-RTB3WS block is a removable terminal block is a member of the FLEX 5000 product line. It features a voltage rating of 18 to 32 Volts DC, and it is used with copper wire with a size of 22 to 14 AWG.

The Allen-Bradley Flex 5000 5094-RTB3WSXT removable terminal block is an essential component of the terminal base for different Flex 5000 output modules. Its output current rating is 2 Amps at 125 Volts DC and 240 Volts AC and 50 to 60 Hertz.

The 5094-RTB3WXT block is an Allen-Bradley removable terminal block. It has a current output of 2 Amps.

The 5094-RTB3XT block is a removable terminal block by Allen-Bradley. It is powered with a 24 Volts DC power supply.

The Allen-Bradley 5094-SAJMPR-QTY10 accessory kit comes with 10 SA power jumpers for the FLEX 5000 machine control systems. These power jumpers can be used to create daisy chain power connections between FLEX 5000 screw-type terminal bases.

The Allen-Bradley 5094-STB-QTY5 shield bar kit comes with 5 screw-type shield bars that are made for the Allen-Bradley FLEX 5000 modules and terminal bases. The input and output rating for these bars is 2 Amps of current at 32 Volts DC voltage maximum.