GE / IP FANUC Series 90/30 In Stock

A Global Supplier of Industrial Electronics

Mon-Fri 8AM-5PM EST

1791-IOVW

Rated 4.7/5 Based on 6 ratings.

Rate your purchase of the 1791-IOVW

Rockwell Disclaimer: The product is used surplus. PDF Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because PDF Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, PDF Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. PDF Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. PDF Supply also makes no representations as to your right to install any such firmware on the product. PDF Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

PDF Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with PDF Supply's 1-year, 2-year, or 3-year warranty.

Original Packaging

$941

10 In Stock

1 Yr PDF Supply warranty

What is Original Packaging?

Ships .

Refurbished

$361

Save $580

17 In Stock

1 Yr PDF Supply warranty

What is Refurbished?

Ships .

Other Available Revisions for the 1791-IOVW 1791-IOVW//A

Common misspellings:
  • l791-IOVW
  • 179l-IOVW
  • 1791-1OVW
  • 1791-lOVW
  • 1791-I0VW
  • 1791IOVW

Technical Specifications for 1791-IOVW

BrandAllen-Bradley / Rockwell Automation
SeriesBlock I/O
Part Number1791-IOVW
DescriptionDC Block I/O Module
Current Rating100 milliamps
Voltage Rating24 Volts DC
Number of Outputs32 Sinking Outputs
Number of Inputs32 Sourcing Inputs
Group IsolationYes
On-State Voltage Range12.0 to 26.4 Volt DC
On/Off Signal Delay Time 1.0 Millisecond
CommunicationRemote I/O Network
Compatible ControllersPLC-2, 3, 5/250, and SLC-500
Dimensions6.9 x 2.7 x 3.8 Inches

About 1791-IOVW

The Allen-Bradley 1791-IOVW Block I/O Module is a 64-channel I/O module that uses sourcing inputs and sinking outputs for monitoring remotely connected external input and output devices. The 1791-IOVW Block I/O Module, like most 1791 Block I/O modules, requires an external DC power supply that is capable of supplying 18 to 26.4 Volts DC voltage and 100 milliamps of current. The 1791-IOVW Block I/O Module has 2 DIP switches for the configuration of the I/O and setting the rack address. The 1791-IOVW Block I/O Module supports an external DC power supply. The external DC power source supplies the required 18 to 26.4 Volts DC voltage and 100 milliamps of current at 2.0 Amps of surge current for 10.0 milliseconds duration.

The 1791-IOVW Block I/O Module has 32 non-isolated sourcing inputs grouped in 2 groups of 16 inputs each. Each input group is electrically isolated from the next group and they have a combined current rating of 2.4 Volts DC. Every input channel has an on-state voltage range of 12.0 to 26.4 Volts DC and typical on-state current rating of 5.5 milliamps at 24 Volts DC input voltage. The 1791-IOVW Block I/O Module has a maximum impedance rating of 3.4 Kiloohms per channel and maximum signal delay duration of 1.0 millisecond from off to on. The 1791-IOVW Block I/O Module has 32 sourcing outputs arranged in 2 groups of 16 output circuits each. Each output group is individually isolated from the other and they are fused to provide short-circuit protection. The 1791-IOVW Block I/O Module has an on-state output voltage range of 18 to 34 Volts DC at 30 milliamps of maximum resistive output load. It has a maximum output current rating of 2.4 Amps (continuous) per group and a maximum surge rating of 1.0 Amp per output point.

The Allen-Bradley 1791-IOVW DC Block I/O Module is a 64-point I/O block module designed to control and monitor external devices that are connected on the remote I/O link. This module has 32 sourcing inputs and 32 sinking outputs.

F.A.Q for 1791-IOVW

PDF Supply sells used surplus products. PDF Supply is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by PDF Supply come with PDF Supply’s 1-year, 2-year, or 3-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.

Rockwell Disclaimer: The product is used surplus. PDF Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because PDF Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, PDF Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. PDF Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. PDF Supply also makes no representations as to your right to install any such firmware on the product. PDF Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.