GE / IP FANUC Series 90/30 In Stock
Home » Allen Bradley » Block I/O » You are here: 1791-8ac
1791-8ac
Rockwell Disclaimer: The product is used surplus. PDF Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because PDF Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, PDF Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. PDF Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. PDF Supply also makes no representations as to your right to install any such firmware on the product. PDF Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
PDF Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with PDF Supply's 1-year, 2-year, or 3-year warranty.
Product Description
The Allen-Bradley 1791-8AC Block I/O series module has 8 inputs and 8 outputs. These inputs and outputs operate with a current of 11 milliamps and a voltage of up to 132 Volts AC.
Other Available Revisions for the 1791-8ac 1791-8ac//A1791-8ac//B
Common misspellings:
- l791-8ac
- 179l-8ac
- 1791-bac
- 17918ac
Technical Specifications for 1791-8ac
| Brand | Allen-Bradley / Rockwell Automation |
|---|---|
| Series | Block I/O |
| Part number | 1791-8AC |
| Type | I/O module |
| I/O channels | 8 inputs/8 outputs |
| On-state input current | 11 mA |
| On-state voltage range | 79-132V AC, 47-63 Hertz |
| Input impedance | 15K Ohms |
| Output voltage range | 20-132V AC |
| External power | 85-132V AC, 47-63 Hz |
| Isolation | 500V AC |
| Dimensions | 176.5 x 110.5 x 98 mm |
| Power dissipation | 12,9 Watts |
About 1791-8ac
The 1791-8AC module is a Block I/O module that has been manufactured and introduced to the machine control industry by Allen-Bradley/Rockwell Automation into the Allen-Bradley 1791 product line of Block I/O modules. This Block I/O module comes with both inputs and outputs and it also provides isolation between both of these groups. This isolation also works between the power supply and the RIO and between the circuit groups and the logic group. This module comes with removable terminal strips and channel indicators that show the current status of each input and output. The Allen-Bradley 1791-8AC Block I/O module comes with an internally protected external power source that provides a voltage range of 85 to 132 Volts AC.
The input specifications of the Allen-Bradley 1791-8AC Block I/O module are a nominal input current of 11 milliamps, a nominal input voltage of 120 Volts AC, an input impedance of 15 kiloohms, an input signal delay of 1 millisecond, and a frequency of 47 to 63 Hertz. The output specifications of the Allen-Bradley 1791-8AC Block I/O module are an output voltage range of 20 to 132 Volts AC, a current rating of 150 to 300 milliamps depending on the installation position of the module, a surge current of 10 Amps, and a minimum on-state current of 50 milliamps per output. In general, the module comes with 8 inputs and 8 outputs that are arranged in their respective groups. The module can be used in environments with an operating temperature range of 0 to 60 degrees Celsius and a relative humidity range of 5 to 95 percent without condensation. Overheating must be avoided.
The Allen-Bradley 1791-8AC Block I/O series module has 8 inputs and 8 outputs. These inputs and outputs operate with a current of 11 milliamps and a voltage of up to 132 Volts AC.
F.A.Q for 1791-8ac
