GE / IP FANUC Series 90/30 In Stock
Home » Allen Bradley » Block I/O » You are here: 1791-32A0
1791-32A0
Rockwell Disclaimer: The product is used surplus. PDF Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because PDF Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, PDF Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. PDF Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. PDF Supply also makes no representations as to your right to install any such firmware on the product. PDF Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
PDF Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with PDF Supply's 1-year, 2-year, or 3-year warranty.
Other Available Revisions for the 1791-32A0 1791-32A0//A1791-32A0//B
Common misspellings:
- l791-32A0
- 179l-32A0
- 1791-32Ao
- 179132A0
Technical Specifications for 1791-32A0
| Brand | Allen-Bradley / Rockwell Automation |
|---|---|
| Series | Block I/O |
| Part number | 1791-32A0 |
| Product type | I/O module |
| I/O channels | 32 inputs |
| Onstate input current | 11 mA |
| Input voltage range | 120 Volts AC |
| Input impedance | 15K Ohms |
| Input signal delay | 1 ms |
| External power | 85-132V AC, 47-63 Hz |
| Isolation | 500V AC |
| Dimensions | 176.5 x 110.5 x 98 mm |
| Power dissipation | 11,36 Watts |
About 1791-32A0
The 1791-32A0 module is a discrete Block I/O module that has been designed by Allen-Bradley/Rockwell Automation and included in the 1791 series. This specific module comes with 32 inputs and it operates with AC voltage. This discrete I/O module needs to be installed vertically and it comes with 2 mounting holes so that it can be properly fixed onto a wall or another stable surface. It is recommended to determine how many blocks are going to be installed in the whole system so that these blocks can all be arranged properly. There must be a space of 2 inches between 2 blocks so that it can ventilate properly. The Allen-Bradley/Rockwell Automation 1791-32A0 discrete Block I/O module has been designed to operate with a voltage of 120 Volts AC and an input current of 11 milliamps. This module does not include outputs.
The Allen-Bradley/Rockwell Automation 1791-32A0 discrete Block I/O module has an external power supply voltage range of 85 to 132 Volts AC. This power supply is internally protected and it does not require the application of fuses. It has a maximum current rating of 150 milliamps. The Allen-Bradley/Rockwell Automation 1791-32A0 discrete Block I/O module has a power dissipation rating of 13.62 Watts and a thermal dissipation rating of 46.44 BTU per hour. It can be used as the only block in the system or with additional I/O blocks. The conductors of the module need to be stranded wires and with at least a diameter of 14 gauge. The conductors must be Category 1 conductors.
The Allen-Bradley 1791-24BR Block I/O module comes with 32 inputs. It operates with a nominal voltage of 120 Volts AC.
F.A.Q for 1791-32A0
